PETG – Polyethylene Terephthalate Glycol
Tough clear plastic sheet, used frequently in vacuum forming
PETG is a plastic resin of the polyester family that is used to make thermoforming applications. PETG is a clear resin that can be extruded into sheets. One of the most common applications of this plastic is in POP Displays, molds (food, candy, soap, candle), medical face shields, and more commonly seen in drinking water bottles.
Why you should use PETG:
- Has excellent bending and Vacuum form properties
- Is very easy to fabricate
- Excellent impact strength
- Standard material is not UV stabilized
- Tougher than Acrylic, but not quite as impact resistant as Polycarbonate
- PETG is ITAR compliant, and PETG is RoHS compliant
- Excellent fabrication
- Low cost material with high impact strength
- Easy to form, punch, rivet and cut
- Paintable, printable, and silk screens well
Material Available As:
Thin Sheet and Sheets:
.020″ -.500″ Thickness in 48″ X96″ Sheets
Film: Special Order – Please call with your Requirements
These properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed nor implied.