Both POM grades have very similar properties. Our clients seem to prefer the Dupont brand name Homopolymer materials because of the superior physical properties. The issues that lead clients to the Copolymer is a slightly lower cost, and the minor inherent center-line porosity in the Delrin® 150SA Homopolymer grade.
Dupont™ Delrin ® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
The Delrin® 150SA is a brand name of Dupont, and it is often referred to as POM-H or Acetal Homopolymer. Common brand or trade names for extruded Acetal sheet and rod materials include: Tecaform® AH, SUSTARIN® C, ZL® 900-C, Pomalux®, Unital®, Mechatec Acetal®, Acetron® and many more.
Specializing in Wholesale Acetal and Delrin Engineering Plastics, Mechanical Plastics and High Performance Plastics
**Note: Delrin® is a registered Trademark of Dupont
Both the Dupont Delrin® and Acetal Copolymer are FDA Compliant
They are very stiff and have excellent dimensional stability
Are self-lubricating, abrasion-resistant, and have excellent wear properties
Cuts extremely well with standard cutting tools
Delrin® AF (PTFE Filled), Glass Filled and Specialty Grades Available
Delrin® Rod and Plate have similar properties and frequently replace:Noryl®,NylonandPETmaterials
Some reasons to choose Homopolymer vs. Copolymer
Both POM grades have very similar properties. Our clients seem to prefer the Acetal over the Homopolymer materials due to the inherent center-line porosity in the Delrin® Homo-polymer version. This means, that along the center of a rod, or the middle of a sheet, there is a band of area with tiny porous holes. This can weaken or cause problems with a finished part, and in extreme cases, you may see blow by or leakage at this center line. While Delrin® is a brand name, it is a POM Homo-polymer.
The most requested and popular item we supply is the Acetal; the POM Copolymer resin made by one of the other big resin manufacturers – like BASF or Celanese/Tacona.
Both Delrin and Acetal are ITAR compliant, and Delrin and Acetal are RoHS compliant.
The most requested and popular item we supply is the Acetal; the POM Co-polymer resin made by one of the other big resin manufacturers – like BASF or Celanese/Tacona.
Both of these premium performance plastic resins are readily available. If you would prefer the Delrin® brand Sheet or Rod, drop us a line, send us an email – we will be happy to ship the requested material for you. We don’t make judgments on the suitability of material for your application, we just supply what you, our clients ask for. Please, just let us know ahead of time if you have a preference. There are a few other names we hear when people are looking for Delrin®, like Delron, Delran, Delrun, Delren, and many more. Just let us know, and we will be happy to supply a high quality Delrin® brand or Copolymer Acetal product.
Industrial Plastic Supply proudly stocks Acetal and Dupont Delrin 150SA from these premium manufacturers:
Ensinger® Plastics for Dupont Delrin 150SA and Tecaform AH Copolymer Acetal
Rochling® Plastics for Dupont Delrin 150SA and Sustarin C Copolymer Acetal
Z/L Plastics® for Dupont Delrin 150SA and ZL® 900 series Copolymer Acetal
And many more ‘American Made’ quality plastic manufacturers.
Both Delrin and Acetal are ITAR compliant, and Delrin and Acetal are RoHS compliant.
Acetal materials are excellent machining materials – a favorite of machinists. Works like a soft brass, and has exceptional dimensional stability. It comes as a stress relieved material, however if you plan to do extensive machining, you may need to stress relieve the parts prior to final pass. Rods are machined well in lathe and mill, sheets are machined or cut in most common machine tools.
Excellent Machining
Low co-efficient of Friction
Very low moisture resistance
The work horse of the mechanical plastics family, it is one of the most popular grades of material we supply. Other brand or trade names: Pomalux®, Acetron®, Ensital®, Unital®, Tecaform®, Ultraform®, Celcon®, BASF®, Hostaform®, Ticona®, and Dupont Delrin®. Occasionally we are asked for the difference between Acetal and HDPE – here is an explanation. Applications – Frequently used in:
Wear and Slide machined parts from Rod and Plate
FDA, NSF, 3-A, and USDA Compliant Machined Parts
Easily machined parts for water / moisture environments
Critical tolerance and dimensionally stable parts
185 degrees F Continuous Temperature Environments
Rod and Rods, Sheet and Sheets for numerous applications
Acetal Sheet and Rod Specifications:
In stock we normally carry one of these resins: BASF Ultraform® H4320, Kepital® F10-02, or Hostaform® M25. Current Certifications and Specifications used for Acetal – Delrin®: FDA, USDA, NSF, ASTM D6778 Superseded or out dated Specifications for Acetal – Delrin®: L-P-392, ASTM D4181
Materials Available As
Delrin® Sheet – Delrin®Plate or Acetal Sheet – Acetal Plate: .062″ – 6.0″ up to 48″ X 120″ in Natural (White) and Black (Acetal sheet and Acetal Plate thickness normally in stock: .125″, .187″, .250″, .312″, .375″, .500″, .625″, .750″, .875″, 1.0″, 1.250″, 1.500″, 1.750″, 2.0″, 2.250″, 2.500″, 2.750″, 3.0″, 3.250″, 3.50″, 3.750″, 4.0″, 4.50″, 5.0″ and larger)
Delrin® AF Sheet and Plate: .062″ – 3.0″ thick in 24″ X 48″, brown in color
Delrin® AF Rod: .250″ – 10″ diameter rod in up to 120″ lengths, brown in color
Film: .005″ – .062″ up to 24″ wide in Natural (White) and Black (minimums may apply)
Acetal Rod and Rods: .125″ – 10″ diameter in Natural (White) and Black up to 120″ lengths For Colored Acetal – Delrin Rod® Read Here. (Acetal Rod diameters normally in stock: .125″, .187″, .250″, .312″, .375″, .437″, .500″, .562″, .625″, .750″, .875″, 1.0″, 1.125″, 1.250″, 1.375″, 1.500″, 1.625″, 1.750″, 2.0″, 2.250″, 2.500″, 2.750″, 3.0″, 3.250″, 3.50″, 3.750″, 4.0″, 4.50″, 5.0″ and many more – up to 20.0″ diameter rod is available!)
Special Formulations: Conductive, Static Dissipative, PTFE-TFE Filled, Glass Reinforced, Custom Sizes, Formulations, or Colors Occasionally we are asked for the difference between Acetal and HDPE – here is an explanation.
Typical Resin Properties:
General Property
ASTM Test
Typical Value Unfilled Delrin® Homo-Polymer
Typical Value Unfilled Co-Polymer
Typical Value Delrin® AF
Specific Gravity
D792
1.42
1.40
1.50
Tensile Strength Yield
D638
9,600 – 11,000
9,000 – 10,200
7,600
Tensile Modulus
D638
450,000
400,000
400,000
Izod Impact – Notched
D256
1.2
1.0
0.9
Hardness – Rockwell
D785
M94
M90
M89
Deflection Temp @ 264psi
D648
257
220
260
Deflection Temp @ 66 psi
D648
347
335
347
Water Absorption @ 24 hrs
%
0.24
0.25
0.20
Co. Thermal Expansion
D696
6.83X10-5
5.4X10-5
5.0X10-5
These Properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed nor implied.
Both Acetal (POM) grades have very similar properties. Our clients seem to prefer the Dupont brand name Homopolymer materials because of the superior physical properties. The issues that lead clients to the Copolymer is a slightly lower cost, and the minor inherent center-line porosity in the Delrin® 150SA Homopolymer grade.
Dupont™ Delrin ® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
The Delrin® 150SA is a brand name of Dupont, and it is often referred to as POM-H or Acetal Homopolymer. Common brand or trade names for extruded Acetal sheet and rod materials include: Tecaform® AH, SUSTARIN® C, ZL® 900-C, Pomalux®, Unital®, Mechatec Acetal®, Acetron® and many more. This excellent mechanical plastic material is also referred to as: Acetal Copolymer rod, Copolymer Acetal rod, Copolymer Plastic Rod, Acetal Copolymer vs Acetal Homopolymer, Homopolymer Acetal rod, Acetal Homopolymer rod, and many others.
Specializing in Wholesale Acetal and Delrin Engineering Plastics, Mechanical Plastics and High Performance Plastics
**Note: Delrin® is a registered Trademark of Dupont
Both the Dupont Delrin® and Acetal Copolymer are FDA Compliant
They are very stiff and have excellent dimensional stability
Are self-lubricating, abrasion-resistant, and have excellent wear properties
Cuts extremely well with standard cutting tools
Delrin® AF (PTFE Filled), Glass Filled and Specialty Grades Available
Delrin® Rod and Plate have similar properties and frequently replace:Noryl®, Nylon and PET materials
Some reasons to choose Homopolymer vs. Copolymer
Both POM grades have very similar properties. Our clients seem to prefer the Acetal over the Homopolymer materials due to the inherent center-line porosity in the Delrin® Homo-polymer version. This means, that along the center of a rod, or the middle of a sheet, there is a band of area with tiny porous holes. This can weaken or cause problems with a finished part, and in extreme cases, you may see blow by or leakage at this center line. While Delrin® is a brand name, it is a POM Homo-polymer.
The most requested and popular item we supply is the Acetal; the POM Copolymer resin made by one of the other big resin manufacturers – like BASF or Celanese/Tacona.
Both Delrin and Acetal are ITAR compliant, and Delrin and Acetal are RoHS compliant.
The most requested and popular item we supply is the Acetal; the POM Co-polymer resin made by one of the other big resin manufacturers – like BASF or Celanese/Tacona.
Both of these premium performance plastic resins are readily available. If you would prefer the Delrin® brand Sheet or Rod, drop us a line, send us an email – we will be happy to ship the requested material for you. We don’t make judgments on the suitability of material for your application, we just supply what you, our clients ask for. Please, just let us know ahead of time if you have a preference. There are a few other names we hear when people are looking for Delrin®, like Delron, Delran, Delrun, Delren, and many more. Just let us know, and we will be happy to supply a high quality Delrin® brand or Copolymer Acetal product.
Industrial Plastic Supply proudly stocks Acetal and Dupont Delrin 150SA from these premium manufacturers:
Ensinger® Plastics for Dupont Delrin 150SA and Tecaform AH Copolymer Acetal
Rochling® Plastics for Dupont Delrin 150SA and Sustarin C Copolymer Acetal
Z/L Plastics® for Dupont Delrin 150SA and ZL® 900 series Copolymer Acetal
And many more ‘American Made’ quality plastic manufacturers.
Both Delrin and Acetal are ITAR compliant, and Delrin and Acetal are RoHS compliant.
Acetal materials are excellent machining materials – a favorite of machinists. Works like a soft brass, and has exceptional dimensional stability. It comes as a stress relieved material, however if you plan to do extensive machining, you may need to stress relieve the parts prior to final pass. Rods are machined well in lathe and mill, sheets are machined or cut in most common machine tools.
Excellent Machining
Low co-efficient of Friction
Very low moisture resistance
The work horse of the mechanical plastics family, it is one of the most popular grades of material we supply. Other brand or trade names: Pomalux®, Acetron®, Ensital®, Unital®, Tecaform®, Ultraform®, Celcon®, BASF®, Hostaform®, Ticona®, and Dupont Delrin®. Occasionally we are asked for the difference between Acetal and HDPE – here is an explanation. Applications – Frequently used in:
Wear and Slide machined parts from Rod and Plate
FDA, NSF, 3-A, and USDA Compliant Machined Parts
Easily machined parts for water / moisture environments
Critical tolerance and dimensionally stable parts
185 degrees F Continuous Temperature Environments
Rod and Rods, Sheet and Sheets for numerous applications
Acetal Sheet and Rod Specifications:
In stock we normally carry one of these resins: BASF Ultraform® H4320, Kepital® F10-02, or Hostaform® M25. Current Certifications and Specifications used for Acetal – Delrin®: FDA, USDA, NSF, ASTM D6778 Superseded or out dated Specifications for Acetal – Delrin®: L-P-392, ASTM D4181
Materials Available As
Delrin® Sheet – Delrin®Plate or Acetal Sheet – Acetal Plate: .062″ – 6.0″ up to 48″ X 120″ in Natural (White) and Black.
Delrin® AF Sheet and Plate: .062″ – 3.0″ thick in 24″ X 48″, brown in color
Delrin® AF Rod: .250″ – 10″ diameter rod in up to 120″ lengths, brown in color
Film: .005″ – .062″ up to 24″ wide in Natural (White) and Black (minimums may apply)
Acetal Rod and Rods: .125″ – 10″ diameter in Natural (White) and Black up to 120″ lengths For Colored Acetal – Delrin Rod® Read Here.
Acetal Rod diameters normally in stock: .125″, .187″, .250″, .312″, .375″, .437″, .500″, .562″, .625″, .750″, .875″, 1.0″, 1.125″, 1.250″, 1.375″, 1.500″, 1.625″, 1.750″, 2.0″, 2.250″, 2.500″, 2.750″, 3.0″, 3.250″, 3.50″, 3.750″, 4.0″, 4.50″, 5.0″ and many more – up to 20.0″ diameter rod is available!
Special Formulations: Conductive, Static Dissipative, PTFE-TFE Filled, Glass Reinforced, Custom Sizes, Formulations, or Colors Occasionally we are asked for the difference between Acetal and HDPE – here is an explanation.
Properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed nor implied.
Is HDPE Sheet and Acetal Homopolymer Sheet the same?
Here is another popular question asked by our clients. Is HDPE the same as Acetal Copolymer / Delrin Acetal Homopolymer? No, they are two totally different materials. Although the natural color of both is a milky white to opaque white, and they do look a bit similar, they are not. (HDPE is milky white to almost translucent depending on thickness, and the Acetal materials are a more opaque white to slightly milky – once again depending on thickness . See picture below of .500″ thick samples of HDPE and Acetal sheets)
HDPE and Acetal – Some Differences
The HDPE sheet and rod is a softer material, and is commonly known for its FDA certification and used in numerous food applications, such as: one gallon milk jugs, cutting boards, colored water glasses/cups, and many, many more. While it can be machined, because it is a bit softer and lighter, the tolerances it can be machined to are not very tight. It is not bondable, so it makes a great non-stick surface for sticky foods and adhesives.
The Acetal Copolymer and the premium Delrin® Acetal Homopolymer also have FDA certification, and are used heavily in the food processing industry. This material is a more mechanical material and is used in bearing and wear applications, cams, feeder screws, etc. This material is can be machined to tight tolerances, and will wear for long periods without lubrication. Due to its exceptional wear properties, it is not bondable, thus requiring mechanical fastening or threads to assemble. It has a very low water absorption, and you will find it in your toilet tank as the white moving parts in the filler mechanism. It is an extremely popular material for machinists, as it works much like soft brass.
While HDPE Sheet and Acetal Sheet look similar, they perform quite a bit differently.
While both materials are FDA approved, are machinable and can be used to make rigid wear resistant parts, they are two different resins and have drastically different physical properties. Another major difference is in the weight of these items, HDPE sheet and rod material weighs about 35% less than the Acetal sheet and rod material. Please check the data sheets for more information to assist in proper material selection.Acetal Data Sheet and HDPE Sheet Data
Acetal is commonly known as: Delrin Homopolymer Acetal, Tecaform AH,Ensital, Unital, Pomalux, Ultraform and many more.
HDPE is also known as: Ultraethylux,Densetec, Polystone G, Fortiflex, Versadur, Hostalen, and many more.
Contact us for more details on the HDPE and Acetal families of plastic materials, e-mail us or call 866-832-9315 Topic: HDPE sheet and Delrin Sheet (Acetal Sheet)
Is colored Acetal Copolymer – Delrin® Homopolymer Rod Readily Available?
We get this question frequently.
The easy answer is yes, however, the most common available colors are Black and Natural (white in color). But to continue the thought, we have several manufacturers that run ‘Medical’ grades of Acetal Copolymer as well as Acetal Homopolymer (ie: Dupont Delrin® 150SA Homopolymer Acetal) in several colors. These materials are special run, but can frequently purchase by the standard length without a custom run. The biggest factor may be the price. The colored version of Acetal Copolymer – Delrin Homopolymer Acetal materials are dramatically more expensive.
Colored Acetal Copolymer – Dupont Delrin® Homopolymer 150SA Rod
While price is a factor, the benefits may out weigh the cost. Many of our clients use these colored rods to help differentiate their product from their competition. With colors that can come close to a logo color or match a machine, these advantages are clearly visible. Having a special color available to machine small to medium runs of your product can save you thousands over molding a new part for trials.
What colors can I get in Acetal Copolymer or Dupont Delrin® 150SA Homopolymer Acetal Rod?The range is a bit limited, but does include: brown, dark blue, dark green, gray, light blue, light green, red, rust and yellow (and of course Natural and Black). For details on the properties of these materials click here: Acetal Copolymer and Dupont Delrin® 150SA Homopolymer Acetal.Dupont™ Delrin® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
For specifics on your requirement, please contact us for availability and pricing. Email or call 866-832-9315
We can supply both the Acetal Copolymer and the premium Dupont Delrin 150SA Homopolymer acetal from our premium suppliers: Ensinger Plastics, Z/L Plastics, Rochling Engineered Plastics and others in special formulations.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.