A common standard item in the metals industry is ‘strip’. Strip is normally a piece of material that is 1/16″ – 3/8″ thick and 1.0″ – 4.0″ wide, although thicker and wider materials can also be referred to as strip. The metals industry produces various metals in these sizes of strip. In the plastics industry, strip is something we cut from larger sheets. The sizes are the same as listed above, but are cut from 48″ X 96″ or 48″ X 120″ sheets.
The a few of the most common plastics materials we cut to plastic strips are:
Most plastics can be cut to these strip sizes, with various lengths available depending on type of material. In some materials and in some sizes, depending on quantity, special run to size plastic strip is available. These special run plastic strips can be run to almost any length. Specifically, in the UHMW and PTFE materials, much longer lengths are available in rolls of material. The UHMW can be purchased in standard and adhesive back varieties. This UHMW with adhesive is a commonly used item in the wear strip applications because of its ease of installation. A large market for this kind of strip is in the food processing industry for all wear points and to reduce noise in the plant. Some of these same sizes with adhesive on the back are available in the PTFE, and are available in long tape style rolls. In some cases, colors other than natural are available, contact us for details.
Plastic Strip and Strips are available in special sizes
With the massive range of plastics available, and most of these materials available to be cut to strips, the nearly unlimited amount of choices in plastic strip availability make this post difficult to be all inclusive. Great material for the industrial, food processing, material handling, automotive and recreational industries.
Most plastics are available in large sheets, and we can cut these sheets to strip for you. Also, depending on the material, size and quantity, we can custom extrude your strip in longer lengths and to your requirements. Decide on a type of plastic, determine the size and quantity, and give us a call. Use your imagination, we can help.
If you have a project where strips would be ideal, please contact us to see if the type of material you need is available in the strip configuration that would be beneficial. Call us at: 866-832-9315 or drop us an email and we will be happy to go to work on your requirement.
Topic: Plastic Strip and Plastic Strips – Strip Plastics
Acetal Copolymer and ABS (Acrylonitrile-Butadiene-Stryene) have some similar properties but are really very different materials. They similarities are: high impact strength, ease of machining with standard cutting tools and good mechanical properties. They are also both FDA compliant and are both good substitutes for brass. They also have great water absorption resistance and good electrical properties. Both materials are good for some of the same applications but certainly not all. Listed below are some of the major differences.
ABS Sheet and Rod Information
ABS comes as Natural (straw) and Black color in Plate, Slab, Sheets and Rods, and thin sheet (.040″ – .250″) it is available as White or Black with a textured surface one side. It can be cut from 48″ X 96″ sheets into strip, panels or pieces.
ABS is formable. ABS is a great thermo-formable material while Acetal is not. Acetal is used more for machined parts such as gears and screws. ABS is great for molding and shaping parts from vacuum to heat forming. Excellent for model building and prototype projects.
ABS is easily bondable (similar to PVC). ABS can be bonded or welded to itself. Because Acetal is self lubricating, it is not possible for anything to stick to it unless etching is done – therefor it is not bondable.
ABS is a great material for painting and silk screening. While Acetal can not be painted or silk screened unless it has undergone Corona Treating (a flame surface treatment), but if treated will nice paint or screened surface.
ABS has better chemical resistance than Acetals. Both are attacked by acids like sulfuric, but ABS has a wider range of resistance to chemicals like aqueous acids, alkaline and alcohol. Acetal will degrade when exposed to such chemicals as chlorine and alkaline.
Specialty grades of ABS are available, including: Glass Filled, Static Dissipating, and Fire Retardant Grades (like Royalite – R59)
ABS Typical Properties Table
General Property
ASTM Test
Value
Specific Gravity
D7921
1.08 – 1.25
Tensile Strength
Yield D638
4,100
Izod Impact – Notched
D256
7.7
Hardness – Rockwell
D785
R105
Deflection Temp @ 264psi
D648
177
Co. Thermal Expansion
D696
5.3X10-54.6 -5.5X10-5
Acetal Copolymer and Homopolymer Sheet and Rod Information
ABS Resin Structure
Acetal is the better machining plastic, considered the best machining plastic material. Because of its durability and wear resistance, Acetal is an excellent choice for producing a wide variety of parts that require high wear resistance over a wide period of time. When machining to tight and specific tolerances, Acetal is ideal.
Acetal has low co-efficient of friction. Due to its self lubricating properties, it is a great material for sliding and wear applications. This material provides years of maintenance free bushings and bearings.
Acetal sheet is produced from .062″ – over 6″ thick and sheet sizes of up to 48″ X 120″ as standard. The standard color for Acetal and Delrin is Natural (a deep milky white) and Black. Some colors are available as Medical Grade, and can be obtained in limited sizes. These sheet are available cut to: slabs, blocks, plates, slabs and blocks.
Acetal (Polyoxymethylene) can be both a homopolymer and a copolymer. The homopolymer acetal has a repeating chain of one atom while the Acetal copolymer has two atoms forming a repeating chain. Dupont™ Delrin® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
Acetal – Delrin Properties Table
General Property
ASTM Test
Typical Value Unfilled Homo-Polymer
Typical Value Unfilled Co-Polymer
Specific Gravity
D792
1.42
1.40
Tensile Strength Yield
D638
9,600 – 11,000
9,000 – 10,200
Tensile Modulus
D638
450,000
400,000
Izod Impact – Notched
D256
1.2
1.0
Hardness – Rockwell
D785
M94
M90
Deflection Temp @ 264psi
D648
257
220
Deflection Temp @ 66 psi
D648
347
335
Water Absorption @ 24 hrs
%
0.24
0.25
Co. Thermal Expansion
D696
6.83X10-5
5.4X10-5
ABS and Acetal – Similar, but very different materials
Both of these materials possess excellent qualities and have a wide range of different uses. Acetal is great for machining, while ABS is great for forming and bonding. They both can be used for machined parts and are great choices for food contact and electrical applications. These two materials are both strong and durable plastics, but one might be better than the other for a specific job. When picking the right plastic, it is important to compare plastics and their specific properties to make sure the material won’t fail and that your job will be successful.
Contact us for additional information, call us at 866-832-9315 or contact us here. Consider Industrial Plastic Supply for all your plastic needs, we want to be your go-to plastic supplier.
**Note: Delrin® is a registered Trademark of Dupont
