The history of metals is thought to have begun with the use of copper about 11,000 years ago. Gold, silver, iron, lead, and even some brass began to be used before the first known appearance of bronze in the 5th millennium BCE
Artifacts made of smelted iron have been found dating from about 3000 BC in Egypt and Mesopotamia. In those times, iron was a ceremonial metal; it was far too expensive to be used in everyday life. Metals are commonly very stiff, tough and strong. However, they are also generally quite heavy. Also, the cost to heat metal to production temperatures is extremely high, over 5 times that of Performance Plastic materials. When metals corrode they get smaller, and many can decompose to yield rust.
In comparison, plastics only were first made in the early 1900’s. The world’s first known fully synthetic plastic was bakelite (now days considered Phenolic), and was invented in New York in 1907 by Leo Baekeland who coined the term ‘plastics’. Since this date, thousands of chemists and material scientists have synthesized dozens of plastic base materials. Plastic materials are currently available in over 80 types, and each of these are molded or processed at slightly different temperatures. The wide range of performance plastic materials will allow you to choose the perfect material for your next application.
Some of The Advantages of New Performance Plastic Materials
New Higher Temperature Performance Plastic Materials
New Performance Plastic materials like Victrex 450g PEEK and Sabic Ultem 1000 have much higher use temperatures over previous performance plastic materials. The Ultem 1000 unfilled has a continual use temperature above 400 degrees F, while the newer Victrex 450g PEEK materials work well at 480 degrees F on a continuous basis. In addition to the higher temperatures, they are still food grade materials.
Most plastic materials can typically be molded in a temperature range of 400 to 600 degree F. While steel starts to melt at 2,500 degrees F. This is five times the temperature, meaning it takes 5 times the energy to convert steel instead of plastic. Lower temperatures equates to lower costs of production.
New Lower Weight Materials
The average plastic weighs just 20% of the average metal product. Many plastics have exceptional weight to strength ratios, meaning that for the weight of the product they are very strong. This low weight means much less raw materials and less impact on the environment if using plastics over metals. This results in lower cost to manufacture parts from plastics over metal.
For instance, new UV grades of HDPE or High Density Polyethylene are very light, with a density of just .96, so light it floats in water. And yet, this new UV grade of HDPE is a workhorse in the plastic market, and is used to replace wood and metals in outdoor furniture.
New Detectable Materials For Food Contact Approved
Most Performance Plastic materials were engineered to be food contact compliant, and in most cases FDA approved for food contact. With the increase in food recalls, finding the proper materials to ensure that our foods are safe is imperative. Materials like Acetal Copolymer, Acetal Homopolymer, Nylon, Ultem 1000 and Victrex 450g PEEK are all FDA approved for direct food contact.
Which Performance Plastic Will Work The Best
Here are some new performance plastic material grades that include additives to make these materials detectable during food processing. These newly released detectable products include Tecaform AH UD (copolymer acetal base), Tecapeek UD Blue (PEEK based) and Hydex 4101 UD Blue PBT – Polyester base). Each of these new performance plastic materials comes in Blue color to be detected by color sensors during food processing. The “UD” portion allows these materials to be detected by X-Ray and Metal Detection scanners in food processing production lines. Using these new detectable performance plastic materials in food processing plants can help to eliminate food contamination issues and massive food recalls.
Recent Rising Costs Of Transportation
Changes in transportation rules and regulations since 2018 have made shipping raw materials significantly more expensive. Weight, size restrictions and surcharges for longer packages have more than doubled in the last year.
This has made one of the most expensive components of materials reaching the marketplace is transportation costs, and over the last several years the costs of moving materials across the country has skyrocketed. Metals are heavy, and this weight makes many items very expensive to transport.
Each step in the production of a finished good generally involves shipping to the next step. Raw material converted into base material, then base material converted into usable shape. Later this shape is turned into a component or part. Each time there is a conversion, there normally is shipping to the next processor. Metal weight can limit the amount of metal that can be moved at one time, where plastics can ship up to five times more product per truckload.
With performance plastics, often the conversion in small factories that can be located near final assembly of components limits the amount of shipping of plastic parts. Also, due to the light weight of plastics, trucks can hold up to five times the amount of plastic over metals for shipping. Many plastic parts are made very close to where they will be consumed, cutting logistics fees. This five times the weight also translates to five times higher cost to ship metals. This reduction of transportation costs moves more profit to the bottom line.
New Performance Plastic Materials Eliminate Need For Lubrication
Often, on large metal parts or assemblies, grease ports are added to make lubricating the metal parts easy. Metal on metal parts will wear out very quickly, and therefore require regular service and lubrication.
Newly released performance plastic materials have made lubrication obsolete. One such material is a new compounded Nylon material, called Nylatech PVM has FDA approved oil additives. This new Cast Nylon material runs well for extended periods without external lubrication. This material runs quieter and smoother than previously used metal parts due to a much lower coefficient of friction, and requires no regular maintenance.
Another new grade of Performance Plastic material that is rated as ‘self-lubricating’, and have excellent wear resistance is Lub-X UHMW, which now makes curves in bottling plants move smoother, quieter and require no lubrication. These long wearing and high strength materials outperform most other substrate for low cost, high performance, low weight and self lubrication.
Each of these plastic advantages yield cost savings and long product life. Along with these new areas of advantage, Performance Plastics are 100% recyclable, and can be reprocessed into high strength parts again and again. The plastic recycling industry is still in its infancy, and as it becomes more adept at recycling and reusing valuable plastic materials, our planet and our pocket books will benefit.
Is HDPE Sheet and Acetal Homopolymer Sheet the same?
Here is another popular question asked by our clients. Is HDPE the same as Acetal Copolymer / Delrin Acetal Homopolymer? No, they are two totally different materials. Although the natural color of both is a milky white to opaque white, and they do look a bit similar, they are not. (HDPE is milky white to almost translucent depending on thickness, and the Acetal materials are a more opaque white to slightly milky – once again depending on thickness . See picture below of .500″ thick samples of HDPE and Acetal sheets)
HDPE and Acetal – Some Differences
The HDPE sheet and rod is a softer material, and is commonly known for its FDA certification and used in numerous food applications, such as: one gallon milk jugs, cutting boards, colored water glasses/cups, and many, many more. While it can be machined, because it is a bit softer and lighter, the tolerances it can be machined to are not very tight. It is not bondable, so it makes a great non-stick surface for sticky foods and adhesives.
The Acetal Copolymer and the premium Delrin® Acetal Homopolymer also have FDA certification, and are used heavily in the food processing industry. This material is a more mechanical material and is used in bearing and wear applications, cams, feeder screws, etc. This material is can be machined to tight tolerances, and will wear for long periods without lubrication. Due to its exceptional wear properties, it is not bondable, thus requiring mechanical fastening or threads to assemble. It has a very low water absorption, and you will find it in your toilet tank as the white moving parts in the filler mechanism. It is an extremely popular material for machinists, as it works much like soft brass.
While HDPE Sheet and Acetal Sheet look similar, they perform quite a bit differently.
While both materials are FDA approved, are machinable and can be used to make rigid wear resistant parts, they are two different resins and have drastically different physical properties. Another major difference is in the weight of these items, HDPE sheet and rod material weighs about 35% less than the Acetal sheet and rod material. Please check the data sheets for more information to assist in proper material selection.Acetal Data Sheet and HDPE Sheet Data
Acetal is commonly known as: Delrin Homopolymer Acetal, Tecaform AH,Ensital, Unital, Pomalux, Ultraform and many more.
HDPE is also known as: Ultraethylux,Densetec, Polystone G, Fortiflex, Versadur, Hostalen, and many more.
Contact us for more details on the HDPE and Acetal families of plastic materials, e-mail us or call 866-832-9315 Topic: HDPE sheet and Delrin Sheet (Acetal Sheet)
A wide variety of plastics are available in sheet form.
The term: ‘Plastic Sheet‘ or ‘Plastic Sheets’ is more of a general statement covering over a hundred types of plastic materials and plastic products. Some of the most popular plastic materials made as a sheet are:
In addition to the wide range of plastic materials available as plastic sheet, most of these materials are also available as: thin gauge or film, strip, plate, block, slab and plastic panels. The thin gauge or film materials are frequently available with or without a pressure sensitive adhesive also called ‘tape’. Sheet in some materials is available over 4.0″ thick and perhaps as thick as 8.0″ thick in a few materials. The standard sheet size on most of our plastic sheets is either 24″ X 48″ or the larger 48″ X 96″ sheet size; although some materials are available as: 48″ X 120″, 60″ X 96″ or 72″ X 96″. Contact us with with questions on your required piece sizes, we are happy to provide plastic sheets cut to size.
While there are lots and lots of different materials available as plastic sheet, there may only be one or two materials that are right for your application. We want to assist with your search. If you need help choosing the proper plastic material for your application, check out our free Plastic Material Selector Guide. Also, feel free to contact us for further assistance. As a leading plastic sheet distributor since 1975, we feel that we are your best choice as your new plastic sheet and sheets supplier. Give us a call at 866-832-9315.
Today’s topic is all about industrial plastic sheet materials in flat sheet or sheets. Also known as plate, slab, strip and bar.
Most plastic materials are processed into sheets or rods. Rods are round, sheet is flat, square or rectangular. These two basic shapes are both generally extruded, although sheet can also be compression molded. Almost all plastic raw materials are available in sheet, and in a huge range of sizes. Most materials are available from .063″ to over 4″ in thickness; and some as thick as 8″ (how to measure thickness accurately, use a 6-Inch Digital Caliper with Extra-Large LCD). Sheet sizes vary, but generally most plastics are produced in 48″ X 96″ sheets or larger, but once again this changes with types of materials and thickness desired. We can help with almost any plastic material.
Need Help Picking a Plastic Sheet Material?
Deciding on the proper material for an application is the first step. Start by reviewing our Plastic Materials Selection Guide to help narrow your search. Having the key properties and needs of your project in mind will help you with this step. Also looking at both the pro’s and con’s of a material will assist in this search. Materials with the greatest property range can be extremely expensive, selecting a material that meets your needs and your budget should be considered.
Step two is researching sizes and availability – this is where we can really help. With most of the major manufacturers as partners, we are able to source your parts from many factories. While the quality from most factories is excellent, the variable is standard and custom sheet sizes. We also stock a wide variety of materials in large sheets. One of our many manufacturers is Westlake Plastics. They have been compression molding large sized sheets of many popular plastic resins; these sheets are available in 48″ X 120″ as a standard sheet size in most plastics. They produce these materials from .250″ – 3.0″ thick or thicker. Other manufacturers produce 24″ X 48″ or 48″ X 96″ sheets as standard. Please contact us for specifics on your material selection.
Mechanical Acetal Sheet
Most of our plastic resins are available as a sheet. This includes some of the most popular plastics, like: Polycarbonate Sheet, Acetal Sheet, PTFE Sheet, Ultem Sheet and dozens more. Sometimes, Plastic sheet is called: Plate, Strip, Bar, Slab, Block or Panel. Please think of these names as being synonyms with Plastic Sheet. Contact us with your special requirements.
In thicker gauges, plastics are frequently referred to as plate, slab or block. And strips or narrow pieces are called bar. A rose by any other name, call it what you will, the plastic starts as a flat sheet from the factory. We can cut them to size or shape. Blanking of sheets to useable sizes is our specialty. Narrow pieces used for long applications are normally called strip. Strip is common in wear type applications.
For a list of materials we have as standard stock materials, check our Plastic Sheets Page. These and many other plastic materials are available, and custom sizes, shapes and colors vary by base material. As a stocking distributor for dozens of major manufactures, we are the West Coasts leading plastic sheet supplier or distributor. If you are in need of some technical assistance go to our Plasticologist page for specific help.
Contact us for more information on plastic sheet materials. Email us or call 866-832-9315
Delrin® Homopolymer Acetal compared with Acetal Copolymer
Many of our clients assume that Delrin® rod and Acetal rod are the same thing. This is not true.
Yes, all Dupont Delrin® rod is Homopolymer Acetal rod, but not all Acetal rod is Delrin® rod.
Delrin® is the trade name for Homopolymer Acetal made by Dupont. Dupont™ Delrin ® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
This is the most recognized of all trade names for Acetal materials, but not the only available Acetal material. The Copolymer Acetal resin is produced by a wide variety of large plastic manufacturers, BASF is probably one of the largest and most well known. Some main resin names are: BASF Ultraform® H4320, Kepital® F10-02, Hostaform® M25 and many others.
While Delrin® Homopolymer Acetal is a wonderful material, in a larger cross sections Homopolymer can exhibit center line porosity, or ‘soft centers’. This can sometimes be seen with the naked eye, and is a darker white in a normally milky white natural colored material. This center line porosity can cause problems in some applications. This porosity can cause leakage of fluid if under pressure, or soft center’s of homopolymer rod and sheet.
This should not stop you from considering Delrin® Homopolymer Acetal though. Many other properties of the homopolymer resins are superior to the copolymer resins. These properties are:
General Property
ASTM Test
Typical Value Unfilled Homo-Polymer
Typical Value Unfilled Co-Polymer
Specific Gravity
D792
1.42
1.40
Tensile Strength Yield
D638
9,600 – 11,000
9,000 – 10,200
Tensile Modulus
D638
450,000
400,000
Izod Impact – Notched
D256
1.2
1.0
Hardness – Rockwell
D785
M94
M90
Deflection Temp @ 264psi
D648
257
220
Deflection Temp @ 66 psi
D648
347
335
Water Absorption @ 24 hrs
%
0.24
0.25
Co. Thermal Expansion
D696
6.83X10-5
5.4X10-5
Some key properties for homopolymer acetal are: higher tensile strength, increased Izod impact, higher deflection temperatures and it is slightly harder. The co-efficient of thermal expansion is a bit higher, and needs to be considered when designing a new part. Extruded Delrin® brand homopolymer resin material also comes in several resin variations, including: Delrin® 150 and Delrin® 507, contact us for details. Dupont™ Delrin® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
Many of our clients prefer the homopolymer rod and sheet for small machined parts. This is due to the increase in a few key properties, and of course brand recognition. Some of our major brand names for quality Copolymer Acetal (POM-C) sheet and Rod include: Tecaform AH®, Sustarin C®, ZL 900® and Pomalux®.
Both resins meet the standard ASTM-D-6778, and the cancelled specs, L-P-395 and ASTM-D-4181. Contact us for certification and specifications you may require.
The Acetal family of plastic resins are excellent for wear resistance, great mechanical strength, and superior machining properties. It is available in a huge range of sizes and shapes. Click here for more details on Acetal – Homopolymer Acetal Rod, and sometimes referred to as plastic dowel. We also have the capacity to supply colored Acetal Copolymer or Delrin® Homopolymer Acetal rod; click here from more details on the colored Acetal material.
Similar materials to Acetal Copolymer – Homopolymer Acetal are Nylon Rod, PET Rod and Noryl® Rod. Most materials are available as round rod, square rod, bar, strip, sheet and plate.
Please contact us for more details on these and other plastic materials. For a comparison chart of plastic materials click here: Plastic Materials Selection Guide
**Note: Delrin® is a registered Trademark of Dupont