This question was very easy to answer, up until now.
First: what is Zytel 42? It is a Natural Nylon 6/6 extrusion grade plastic resin. An extremely popular and heavily used material for machinable and durable plastic parts. For as far back as we can find information, this Zytel 42 Nylon 6/6 resin has been used in numerous food contact and food processing machine components.
We have just received notice that Dupont will be making some changes to their formula for this Nylon grade. For years we have provided our clients with Dupont Zytel 42 Nylon resin extruded into sheet, rod and other profiles. The Dupont announcement states that the Zytel 42 will no longer have a food grade rating – FDA approval. They will produce a new resin called Zytel 42FG, which will have all the approvals we always had with the Zytel 42.
Why in the world would a company do such a thing? Our guess is that this is a cleaver way to increase prices significantly without a standard and blatant price increase. Let’s just hide it in a new resin package.
Zytel 42 – will still be available, but without the FDA approval
Zytel 42FG – the ‘new’ resin will carry the FDA approval, but at much higher price
Nylon Food Grade still available
These huge Cast Nylon Blocks 12″ X 12″ X 48″
What is the difference between the old Zytel 42 and the new Zytel 42FG? From what we have read so far, nothing. It is probably the same material, new name. The ‘new’ Zytel 42 is actually the new ‘dumbed’ down resin – they just took away the Food Grade label, maybe took out an ingredient or two, and viola, new Zytel 42 – non Food Grade Nylon.
This news has spread quickly through our industry. As mentioned above, we have provided this material in this grade for over 36 years for Food Grade/FDA Approved applications.
The main reason for this article is to get the news out the the marketplace. Engineers and designers have been specifying this resin for their applications, and now, with out much notice, the product they assume is Food Grade will no longer be acceptable for these applications. It is unclear at this point whether the extrusion plants will be producing product from both resins, or opting to use one or the other. It appears that Nylon Food Grade resins my become a special, or that all materials may becomes standard as Nylon Food Grade.
Is Nylon Food Grade Resin Important To You?
This is the question we find ourselves asking. Does the end user think of Nylon when they are looking for an FDA approved plastic? Or, do they consider Acetal Copolymer, Acetal Homopolymer, Polyethylene, and other materials first? Do you think of Nylon rod, bar, sheet and slab as mechanical materials to use when making gears, wear strips, and other non FDA applications?
Please take a moment and let us know you thoughts. We value your input – it will help us in evaluating the direction we want to go with our inventory.
Some of our most popular questions are “Is this material UV stable”, or “How long will this last in direct sunlight”, or something similar. These are great questions. Just look at the ‘cheap’ backyard furniture you bought last year, yep, it is faded and cracking. Why is that?
The quick answer is the material had either no UV (Ultra Violet Light) stabilizer or very little. Most plastic materials are not UV stable to start with, other than Acrylic which is invisible to UV. All other materials need a little something to give it the protection it may need from the sun. Many plastic materials, if given the proper additives, can be used in direct sunlight for 10 – 15 years giving excellent performance.
The first factor in picking such a material is the intended use. Not all materials are good candidates for all applications.While some materials will perform very well, others under the same conditions will fail. Please contact us for details on a material to meet your needs. HDPE sheet is one of the best materials for long term outdoor use, if given the proper additives. Next time you drive by a children’s playground in your local city, look at the brightly colored panels used to make the play equipment. This is a HDPE sheet with heavy UV additives, and this makes an excellent application. Available in a rainbow of colors and able to be fabricated easily, this material is excellent for many outdoor applications. If your application is more mechanical, other materials that might be used would be: Polycarbonate, UHMW, ABS (especially with Korad cover), Acetal, Noryl and many more. Our standard Covestro Makrolon Polycarbonate is a UV stable material in sheet, and is frequently used in replacement glazing applications. The remaining materials on the list are available in Black (a carbon black pigment) which extends outdoor usage. While still not recommended for direct sunlight, they can be used with a good possibility of success – depending on design. Plastics can become brittle or lose properties over time if material does not have UV stabilization, with the proper material and the proper additives, you can get years of trouble free service.
Is Lexan® the same as Makrolon® or Tuffak® Polycarbonate?
The short answer is no, are they very similar, yes. The reason is that both Lexan® and Makrolon® are brand names, along with Hyzod®, Cyrolon®, Zelux®, Paltuf®, Tuffak®, Ensicar®, Unicar®, Texin®, Apex® and many more. Lexan® is a brand name for SABIC (Saudi Basic Industries Corporation) which acquired the entire General Electric Plastics division several years ago. Makrolon® (formerly Hyzod®) is a trade name for Covestro (formerly Bayer MaterialSciences).
These materials are all Polycarbonate which is a very tough, high impact plastic material. The base resins are very similar, however, the end product varies quite a bit depending on the manufacturer. The Covestro Bayer Makrolon® GP-V material does meet the UL 94 V-0 flame retardant certification (at .220″ thick), and the Makrolon® GP is UL 94 HB rated.
How do I tell the difference between Lexan® and Makrolon®?
It would be impossible to tell the difference between brands by just looking, unless it still has the masking on, it would take some testing. The majority of both brands of materials are available in a very clear, UV stabilized glazing grade and look identical to the naked eye. This material is excellent for replacing window glass and is virtually unbreakable.
Industrial Plastic Supply stocks the Covestro (Bayer) Makrolon® GP Polycarbonate materials in stock and ready for shipment. We have chosen to carry the Covestro Makrolon® Polycarbonate because of its superior quality, physical properties and ratings. You will find these materials available as sheet and rod here. If you have further questions, or would like to see the data sheet on Makrolon® Polycarbonate and/or Lexan® Polycarbonate for comparison, please give us a call: 866-832-9315 or email: request@indplastic.com
This post is part of our effort to answer as many questions for you as possible, and to assist you in choosing the proper material for your applications, this is another very popular question we hear.
Yes, Lexan® and Makrolon® are both Polycarbonate materials. And we believe that the Covestro Makrolon® is the best Polycarbonate sheet available in the market place.
This is a popular question received from clients. This question has a rather long answer. Most Thermoplastic materials are thermo-formable, and thus vacuum forming compatible. Some of the most common and easier materials for forming are listed below.
Check with us for other materials that may be available for your requirements
Each plastic material has a variety of different properties, and they form at different temperatures. The Acrylic, PETG and Polycarbonate sheets are normally clear (can be special ordered in colors), however the Polycarbonate may have to be heat dried prior to the vacuum forming temperature phase (depending on thickness). ABS and HIS both form very well, and are normally White or Black. The ABS normally has a fine texture called Hair Cell on the primary surface, the Styrene is smooth on two sides. On a special basis Styrene and ABS can be run in almost any thickness up to .375″ thick, and in almost any color (minimums apply) and in a huge range of custom run sheet sizes. While many other materials may be available for special applications and with various improved properties, these are the most commonly available and used materials. Some of the important factors in choosing a material for your vacuum forming project would be: clarity, strength of finished part, temperature, depth of draw, UV resistance, Flame Retardant Rating, thickness and size range.
Large parts can be produced using this process, for example – Hot Tubs and Pick Up Truck Bed Liners. Also vacuum forming is used to produce very small parts like chocolate molds and numerous packaging applications.
Most vacuum forming started in their garage (or kitchen). A simple vacuum forming ‘machine’ can be produced at very low cost using 2 X 4 wood, peg board, and your shop vac. Obviously this is not the way the above hot tub was formed, but the process is rather simple and is much more an art than a science. We have seen several YouTube videos showing entry level – DIY style vacuum forming machines. Most use the kitchen oven as the heat source and are used to make small chocolate molds, wax molds, hobby parts and more. Many materials can be used in this simple process, and we are happy to assist you with your basic questions of the vacuum forming process. There are also a wide range of commercial thermoforming machines (see video) available, in almost unlimited range of sizes.
There is a wide array of materials that can be used, and they have different properties – no one material meets all your needs. Contact us for details on your vacuum forming requirements or with question.
We do hear this question regularly. And, maybe, in years gone by Plastic was that Cheap material.
Back in the 50′s and 60′s, plastics were very inexpensive, and were very limited in types and availability.
What cause this to change?
Plastics are primarily produced from Oil and several Oil by-products. As oil pricing has skyrocketed from the 50′s, so did the low end plastic material pricing.
In addition, a new generation of high tech, mechanical and engineering grades of plastic we developed. These plastics replace metals and other substrates in manufacturing. They out live, out perform most materials at a fraction of the cost of the material it replaces.
Isn’t Cheap better?
All materials are not designed to the same standard. This is true with plastics as well. Choosing the wrong plastic for a project can be a costly mistake. All engineering perimeters should be considered: strength, impact, sunlight, water absorption, electrical resistance, temperature range, etc. We’ve all witnessed the ‘cheap’ plastic kids toy that lasts but a couple of days, the clip or cover in your car breaks off, the inexpensive outdoor furniture and so on. These are examples of under designed or choosing a material for its resin cost, not its physical properties. Thus, no, cheaper is not better. Cost should be just one of your decision criteria.
What Should You Do?
The answer is really quite easy. Ask.
Talk to one of our experienced ‘Plasticologists’ and tell them your requirements. You’re input, and a little time to answer some questions could save you enormous time and expense in your finished parts. All plastics are not created equal, and neither are all plastic suppliers. Give us a try, and take the guess-work out of choosing the right material for your job.
Some of our lower cost materials: HDPE, PVC, Styrene – less expensive, not cheap. Each with very specific strong points, and yes weak areas as well.
Cheap plastic is most likely not the best plastic.
Are Acetal Copolymer and Homopolymer Acetal the same?
This is one of our most common questions, and it is a bit involved of an answer.
There are two main versions of Acetal Resin
Homopolymer Acetal and Copolymer Acetal
The most popular name for a Homopolymer Acetal is the Dupont Delrin, which is a premium Homopolymer Acetal.
The second Acetal is a Copolymer acetal, and there are many suppliers of this resin.
Acetal is the generic, and not all Acetal is Delrin® Hompolymer, nor is it Acetal Copolymer. A distinction is required to determine which is best for your application. There are several manufacturers that produce Acetal Copolymer resin, including: Celanese®, BASF®, Ticona®, SABIC® and many more.
Acetal Copolymer compared to Delrin® Homopolymer Acetal
Delrin® is a premium homopolymer Acetal produced by Dupont. Many of the physical properties of the homopolymer exceed that of the copolymer Acetal. Dupont™ Delrin® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
The generic term ‘Acetal’ covers both the homopolymer from Dupont and the copolymer grades of resin. Both materials meet the ASTM-D-4181, ASTM-D-6100 or ASTM-D-6778 specification (an old call out is L-P-392). Homopolymer Acetal is POM111, and Copolymer Acetal is POM211.
Both are very tough and machinable, and have some similar properties.
An additional difference is the inherit problem of center-line porosity in some of the homopolymer grades. This is caused by out gassing during manufacturing, and can be found at the center or on the surface of all homo-polymer extrusions. This porosity can cause some problems with machining or moisture permeation through the material. The copolymer resin has little to no porosity issue.
Some of the other differences are in the physical properties of the resin. Review the chart for some of the most popular properties people ask for when looking at Acetal Copolymer or Homopolymer Acetal.
See Homopolymer and Copolymer Acetal properties chart below.
Properties
Homopolymer Acetal
Copolymer Acetal
Tensile Modulus of Elasticity
450,000
400,000
Flexural Modulus of Elasticity
470,000
366,000
Heat Deflection Temp @ 264 psi – degrees F
257
220
Melting Point – degrees F
347
335
Coef. of Linear Thermal Expansion
6.8 x 10-5
5.4 x 10-5
Water Absorption @ Saturation
0.90
0.80
Material is available as both Acetal Copolymer or Acetal Homopolymer in Rod, Block, Sheet and Slabs.
Acetal is one of the most widely available plastics, especially on the West Coast (for some reason the East Coast seems to like the Nylon – Polyamide material more). Most commonly available in Natural (White) or Black, but can be produced in a wide range of colors with minimum orders. This enables material matching your product color or for easy identification of parts.
While these properties are similar, depending on your application, one material may be better suited than the other. Review our Delrin® Homopolymer and Acetal Copolymer page for additional information on the product availability and data sheets. We get calls for the premium Delrin® Homopolymer product, but some people may call it Delron, Delran, Delrun, Derlin and many other names, but it is still premium Delrin® Homopolymer Acetal to us.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OkPrivacy policy
