Both Acetal (POM) grades have very similar properties. Our clients seem to prefer the Dupont brand name Homopolymer materials because of the superior physical properties. The issues that lead clients to the Copolymer is a slightly lower cost, and the minor inherent center-line porosity in the Delrin® 150SA Homopolymer grade.
Dupont™ Delrin ® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
The Delrin® 150SA is a brand name of Dupont, and it is often referred to as POM-H or Acetal Homopolymer. Common brand or trade names for extruded Acetal sheet and rod materials include: Tecaform® AH, SUSTARIN® C, ZL® 900-C, Pomalux®, Unital®, Mechatec Acetal®, Acetron® and many more. This excellent mechanical plastic material is also referred to as: Acetal Copolymer rod, Copolymer Acetal rod, Copolymer Plastic Rod, Acetal Copolymer vs Acetal Homopolymer, Homopolymer Acetal rod, Acetal Homopolymer rod, and many others.
Specializing in Wholesale Acetal and Delrin Engineering Plastics, Mechanical Plastics and High Performance Plastics
**Note: Delrin® is a registered Trademark of Dupont
Both the Dupont Delrin® and Acetal Copolymer are FDA Compliant
They are very stiff and have excellent dimensional stability
Are self-lubricating, abrasion-resistant, and have excellent wear properties
Cuts extremely well with standard cutting tools
Delrin® AF (PTFE Filled), Glass Filled and Specialty Grades Available
Delrin® Rod and Plate have similar properties and frequently replace:Noryl®, Nylon and PET materials
Some reasons to choose Homopolymer vs. Copolymer
Both POM grades have very similar properties. Our clients seem to prefer the Acetal over the Homopolymer materials due to the inherent center-line porosity in the Delrin® Homo-polymer version. This means, that along the center of a rod, or the middle of a sheet, there is a band of area with tiny porous holes. This can weaken or cause problems with a finished part, and in extreme cases, you may see blow by or leakage at this center line. While Delrin® is a brand name, it is a POM Homo-polymer.
The most requested and popular item we supply is the Acetal; the POM Copolymer resin made by one of the other big resin manufacturers – like BASF or Celanese/Tacona.
Both Delrin and Acetal are ITAR compliant, and Delrin and Acetal are RoHS compliant.
The most requested and popular item we supply is the Acetal; the POM Co-polymer resin made by one of the other big resin manufacturers – like BASF or Celanese/Tacona.
Both of these premium performance plastic resins are readily available. If you would prefer the Delrin® brand Sheet or Rod, drop us a line, send us an email – we will be happy to ship the requested material for you. We don’t make judgments on the suitability of material for your application, we just supply what you, our clients ask for. Please, just let us know ahead of time if you have a preference. There are a few other names we hear when people are looking for Delrin®, like Delron, Delran, Delrun, Delren, and many more. Just let us know, and we will be happy to supply a high quality Delrin® brand or Copolymer Acetal product.
Industrial Plastic Supply proudly stocks Acetal and Dupont Delrin 150SA from these premium manufacturers:
Ensinger® Plastics for Dupont Delrin 150SA and Tecaform AH Copolymer Acetal
Rochling® Plastics for Dupont Delrin 150SA and Sustarin C Copolymer Acetal
Z/L Plastics® for Dupont Delrin 150SA and ZL® 900 series Copolymer Acetal
And many more ‘American Made’ quality plastic manufacturers.
Both Delrin and Acetal are ITAR compliant, and Delrin and Acetal are RoHS compliant.
Acetal materials are excellent machining materials – a favorite of machinists. Works like a soft brass, and has exceptional dimensional stability. It comes as a stress relieved material, however if you plan to do extensive machining, you may need to stress relieve the parts prior to final pass. Rods are machined well in lathe and mill, sheets are machined or cut in most common machine tools.
Low co-efficient of Friction
Very low moisture resistance
The work horse of the mechanical plastics family, it is one of the most popular grades of material we supply. Other brand or trade names: Pomalux®, Acetron®, Ensital®, Unital®, Tecaform®, Ultraform®, Celcon®, BASF®, Hostaform®, Ticona®, and Dupont Delrin®. Occasionally we are asked for the difference between Acetal and HDPE – here is an explanation. Applications – Frequently used in:
Wear and Slide machined parts from Rod and Plate
FDA, NSF, 3-A, and USDA Compliant Machined Parts
Easily machined parts for water / moisture environments
Critical tolerance and dimensionally stable parts
185 degrees F Continuous Temperature Environments
Rod and Rods, Sheet and Sheets for numerous applications
Acetal Sheet and Rod Specifications:
In stock we normally carry one of these resins: BASF Ultraform® H4320, Kepital® F10-02, or Hostaform® M25. Current Certifications and Specifications used for Acetal – Delrin®: FDA, USDA, NSF, ASTM D6778 Superseded or out dated Specifications for Acetal – Delrin®: L-P-392, ASTM D4181
Materials Available As
Delrin® Sheet – Delrin®Plate or Acetal Sheet – Acetal Plate: .062″ – 6.0″ up to 48″ X 120″ in Natural (White) and Black.
Delrin® AF Sheet and Plate: .062″ – 3.0″ thick in 24″ X 48″, brown in color
Delrin® AF Rod: .250″ – 10″ diameter rod in up to 120″ lengths, brown in color
Film: .005″ – .062″ up to 24″ wide in Natural (White) and Black (minimums may apply)
Acetal Rod and Rods: .125″ – 10″ diameter in Natural (White) and Black up to 120″ lengths For Colored Acetal – Delrin Rod® Read Here.
Acetal Rod diameters normally in stock: .125″, .187″, .250″, .312″, .375″, .437″, .500″, .562″, .625″, .750″, .875″, 1.0″, 1.125″, 1.250″, 1.375″, 1.500″, 1.625″, 1.750″, 2.0″, 2.250″, 2.500″, 2.750″, 3.0″, 3.250″, 3.50″, 3.750″, 4.0″, 4.50″, 5.0″ and many more – up to 20.0″ diameter rod is available!
Special Formulations: Conductive, Static Dissipative, PTFE-TFE Filled, Glass Reinforced, Custom Sizes, Formulations, or Colors Occasionally we are asked for the difference between Acetal and HDPE – here is an explanation.
Properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed nor implied.
During the last year, the number and size of food recalls has been staggering. With several major food processors, specifically in the poultry market, recalling massive amounts of product due to contamination, perhaps a change in material is in order, simply changing to a Metal or X-ray detectable plastic material may end recalls for contamination. The cost to change to a metal detectable plastic or x-ray detectable plastic is extremely small in comparison to the cost of these recalls.
What is a detectable Plastic
There are numerous quality high performance plastic materials that are available in Blue, X-ray and Metal detectable versions. These materials are designed with food safety in mind. These materials can assist the food industry and the food processing supply chain in keeping our foods safe. Identifying contaminates in the processing of foods can be made significantly easier with these detectable materials. Food safety should be the priority within the food processing industry. By changing to metal detectable plastic and X-ray detectable plastics, this can become a reality.
Metal Detectable Plastic and X-Ray Detectable Plastics
Here is a recent Press Release detailing the recalls and a rather straight forward and easy solution using detectable plastic.
(Newswire.net — October 10, 2016) Anaheim, CA – Can ‘Blue’ fix food recalls? –The year 2016 has seen some staggering food recalls by large food processors. Massive recalls of chicken specifically seem to have happened multiple times. The part that is the most amazing is that the root cause of many of these kinds of recalls is preventable. The specific recalls listed below are all for possible plastic contamination in the food product.
These large food processors should be aware of some simple steps that can totally eliminate these kinds of contaminates from getting into their food products.
Penny Wise, Pound Foolish
Keeping Food Processing Safe
While using FDA approved plastic materials for conveyor parts and moving components is a standard practice in most food processing plants, many processors use the cheapest available approved materials. This means that many producers are using a natural (white) HDPE, Acetal or other white approved plastic material. While it is safe to use these plastics, occasionally one of these parts gets jammed, breaks or wears to the point where parts can crack and pieces can get into the food processing line.
It Is Plain To See
The first easy step would be to use the same quality FDA approved material, but to buy the Blue metal detectable plastic version of the same approved material. This minor color change in the material makes any contaminates very easy to see with the naked eye. Since there are no food products in these bright blue colors, as long as there are employees looking at the food line, these broken pieces are easy to detect.
I Can See You
Speaking of detect, the big step up for detection of contaminates is to use a FDA approved plastic that is detectable by the X-ray or metal detection equipment already installed in these food processing lines. While these ‘metal detectable plastics’ cost more, they certainly cost less than one recent 4.5 million pound poultry recall.
The goal here is not to point the finger or call any company a ‘bad processor’, but rather to encourage these great food processors to use the ‘best practice’ types of materials to eliminate these monster food recalls.
In September 2016, Tyson Foods recalled 130,000 pounds of chicken nuggets for foreign materials in the product.
“According to Tyson Foods, the plastic material ranged in size from 21mm in length and 6.5mm in diameter and may have come from a round, hard plastic rod used to connect a plastic transfer belt. The firm said the products pass through a metal detector, but the plastic is not detectable to this technology,” the USDA recall announcement said.
Have You Considered Detectable Blue?
Blue Metal Detectable Plastics From Ensinger
Perhaps they could consider using a metal detectable plastic that is detectable by a standard metal detector. Industrial Plastic Supply has supplied this FDA approved Metal Detectable UHMW rod since early 2010. Currently, there are several FDA approved materials that are available in Blue; UHMW, Acetal, Nylon, Polyester and now PEEK. Some of these materials are also available in a ‘triple detection’ version, where it is detectable because of the vivid Blue color, and it is also Metal detectable and X-Ray detectable. One of these new versions is the Ultra-Detectable Polyester rod made by Ensinger® Plastics called Hydex® 4101 UD Blue (FDA Grade Polyester).
–In April and May of 2016, Pilgrim’s Pride had a recall totaling 5,550,904 pounds (yes 5.5 million pounds) of poultry do to possible foreign matter contamination.
The cost is staggering. To recall this quantity of food takes a small army of people to identify the possibly contaminated batches of food. Then notification is spread to all the possible distribution and wholesalers. The USDA is normally notified as one more step to notify the public.
Simple method to protect the safety of our food chain using detectable plastic materials
What is the cost to change to a more metal detectable plastic?
This depends on the type of plastic, and the detection method.
Let’s assume that the currently used material is an FDA approved grade of 1″ diameter Natural Acetal rod (a popular performance plastic used in food processing). And let’s assume this material would sell for approximately $2.00 – $2.50 per linear foot.
Changing to a Bright Blue FDA approved grade of Acetal Rod would cost about $3.50 – $4.00 per foot.
Upgrading to a Metal and X-ray detectable plastic that is FDA grade and Blue Acetal plastic rod would cost in the range of $8.25 – $9.00 per foot.
A recall of 100,000 pounds of poultry is, of course, significantly more expensive than upgrading the plastic materials in the food processing plant. Consider the upgrade an inexpensive insurance policy against these kinds of monster recalls, with a simple change to metal detectable plastic materials.
Metal Detectable Plastic and X-Ray Detectable Plastics Actually Saves Money
Contact us for more information on these Metal Detectable Plastic and X-Ray detectable plastic products. Blue Sheet and Rod are available in Acetal, Delrin®, Nylon, PBT – Polyester, and more. The special ‘triple detectable’ grades are currently produced in Acetal (Tecaform® UD Blue) and PBT – Polyester (Hydex® 4101 UD Blue). More materials are in final stages of development. Contact us for your special requirements.