The quick answer is: the opposite of single use plastic.
Performance plastics are a wide range of materials that are designed for use in mechanical, engineering, aerospace, food processing, and many other applications. These performance plastic materials generally have superior physical properties, and frequently are used to replace other materials like metals, wood and glass.
Most performance plastic sheets and rods are machinable, and can be used to replace other substrates that can not stand up to the same demanding applications that these performance plastics can. Performance plastics are the natural choice when considering replacement for traditional materials, such as bronze, stainless steel, glass, wood and copper, for not just one reason but rather a combination of features and benefits.
Nearly all Performance Plastic grades can be recycled.
Because of their cost-effectiveness as well as their reliability, durability, and special characteristics like resistance to chemicals and corrosion the high performance plastic materials are steadily replacing metals in the oil and gas industry. The constant development of new and better high performance plastics is therefore closely linked to the development and economic production of the range of available performance plastic materials. High performance plastics can be divided in amorphous and semi-crystalline polymers, just like all polymers.
Performance Plastics properties
Single Use Plastic properties
Long life – up to 50 years of service
Very short, often instant throw away
Little to no physical properties
High Heat Resistance
Very low melting point
Very light weight
Can be Very UV Resistant
Very Long Life
Extremely short life
Tough and Durable
Very High Impact Strength
Flimsy, low value
Why use a Performance Plastic?
Performance plastics are designed for repeated or multi-use applications and generate a smaller carbon footprint than glass, steel, or wood. High performance plastics are plastics that can perform well under extreme environments. Because most performance plastics are considered ‘self lubricating’, these materials can be made into parts that replace metals, and don’t require the continual maintenance and lubrication that metals require.
Over the past few decades Mechanical Plastics have increasingly replaced metals due to their strength-to-weight ratios, and resistance to wear have surpassed aluminum and steel, respectively. When certain additives are blended with thermoplastic polymers, this performance plastic can meet code and compliance requirements for smoke, flammability, and even toxic gas release. Several high end performance plastics can meet the stringent FM-4910 flame and smoke rating.
Performance Plastic materials are not ‘cheap’
As opposed to ‘single use’ plastics, the performance plastic materials are not inexpensive or ‘throw away’. Rather these high performance materials are designed for specific applications, and out perform most other substrates. Other characteristics of high performance plastics can be extraordinary resistance to wear and tear, high purity or particular electrical insulation. High performance plastics are plastics that can perform well under extreme circumstances. High performance plastics are best known for their temperature, chemical and wear resistance.
Performance Plastics offers high performance plastics for high performance applications, at economical prices, made by quality American made engineering plastics manufacturers. High-performance plastics are formulated to operate under extreme chemical, high temperature and heavy load applications or any combination of these. Most performance plastics are used where the highest demands are placed on thermal or chemical resistance, product mechanics, or on the self-lubrication of products. Several of our key North American suppliers are: Ensinger Plastics, Rochling Plastics, Z/L Engineering Plastics, Simona-America, Plaskolite, and many more.
In the performance plastic market, one size does not fit all. With over 50 high performance plastics, each with its own physical properties, several materials may be proper choices for your performance plastic requirement. Please feel free to call one of our certified and trained customer service personnel for assistance in choosing the best performance plastic for your application.
During the last year, the number and size of food recalls has been staggering. With several major food processors, specifically in the poultry market, recalling massive amounts of product due to contamination, perhaps a change in material is in order, simply changing to a Metal or X-ray detectable plastic material may end recalls for contamination. The cost to change to a metal detectable plastic or x-ray detectable plastic is extremely small in comparison to the cost of these recalls.
What is a detectable Plastic
There are numerous quality high performance plastic materials that are available in Blue, X-ray and Metal detectable versions. These materials are designed with food safety in mind. These materials can assist the food industry and the food processing supply chain in keeping our foods safe. Identifying contaminates in the processing of foods can be made significantly easier with these detectable materials. Food safety should be the priority within the food processing industry. By changing to metal detectable plastic and X-ray detectable plastics, this can become a reality.
Metal Detectable Plastic and X-Ray Detectable Plastics
Here is a recent Press Release detailing the recalls and a rather straight forward and easy solution using detectable plastic.
(Newswire.net — October 10, 2016) Anaheim, CA – Can ‘Blue’ fix food recalls? –The year 2016 has seen some staggering food recalls by large food processors. Massive recalls of chicken specifically seem to have happened multiple times. The part that is the most amazing is that the root cause of many of these kinds of recalls is preventable. The specific recalls listed below are all for possible plastic contamination in the food product.
These large food processors should be aware of some simple steps that can totally eliminate these kinds of contaminates from getting into their food products.
Penny Wise, Pound Foolish
Keeping Food Processing Safe
While using FDA approved plastic materials for conveyor parts and moving components is a standard practice in most food processing plants, many processors use the cheapest available approved materials. This means that many producers are using a natural (white) HDPE, Acetal or other white approved plastic material. While it is safe to use these plastics, occasionally one of these parts gets jammed, breaks or wears to the point where parts can crack and pieces can get into the food processing line.
It Is Plain To See
The first easy step would be to use the same quality FDA approved material, but to buy the Blue metal detectable plastic version of the same approved material. This minor color change in the material makes any contaminates very easy to see with the naked eye. Since there are no food products in these bright blue colors, as long as there are employees looking at the food line, these broken pieces are easy to detect.
I Can See You
Speaking of detect, the big step up for detection of contaminates is to use a FDA approved plastic that is detectable by the X-ray or metal detection equipment already installed in these food processing lines. While these ‘metal detectable plastics’ cost more, they certainly cost less than one recent 4.5 million pound poultry recall.
The goal here is not to point the finger or call any company a ‘bad processor’, but rather to encourage these great food processors to use the ‘best practice’ types of materials to eliminate these monster food recalls.
In September 2016, Tyson Foods recalled 130,000 pounds of chicken nuggets for foreign materials in the product.
“According to Tyson Foods, the plastic material ranged in size from 21mm in length and 6.5mm in diameter and may have come from a round, hard plastic rod used to connect a plastic transfer belt. The firm said the products pass through a metal detector, but the plastic is not detectable to this technology,” the USDA recall announcement said.
Have You Considered Detectable Blue?
Blue Metal Detectable Plastics From Ensinger
Perhaps they could consider using a metal detectable plastic that is detectable by a standard metal detector. Industrial Plastic Supply has supplied this FDA approved Metal Detectable UHMW rod since early 2010. Currently, there are several FDA approved materials that are available in Blue; UHMW, Acetal, Nylon, Polyester and now PEEK. Some of these materials are also available in a ‘triple detection’ version, where it is detectable because of the vivid Blue color, and it is also Metal detectable and X-Ray detectable. One of these new versions is the Ultra-Detectable Polyester rod made by Ensinger® Plastics called Hydex® 4101 UD Blue (FDA Grade Polyester).
–In April and May of 2016, Pilgrim’s Pride had a recall totaling 5,550,904 pounds (yes 5.5 million pounds) of poultry do to possible foreign matter contamination.
The cost is staggering. To recall this quantity of food takes a small army of people to identify the possibly contaminated batches of food. Then notification is spread to all the possible distribution and wholesalers. The USDA is normally notified as one more step to notify the public.
Simple method to protect the safety of our food chain using detectable plastic materials
What is the cost to change to a more metal detectable plastic?
This depends on the type of plastic, and the detection method.
Let’s assume that the currently used material is an FDA approved grade of 1″ diameter Natural Acetal rod (a popular performance plastic used in food processing). And let’s assume this material would sell for approximately $2.00 – $2.50 per linear foot.
Changing to a Bright Blue FDA approved grade of Acetal Rod would cost about $3.50 – $4.00 per foot.
Upgrading to a Metal and X-ray detectable plastic that is FDA grade and Blue Acetal plastic rod would cost in the range of $8.25 – $9.00 per foot.
A recall of 100,000 pounds of poultry is, of course, significantly more expensive than upgrading the plastic materials in the food processing plant. Consider the upgrade an inexpensive insurance policy against these kinds of monster recalls, with a simple change to metal detectable plastic materials.
Metal Detectable Plastic and X-Ray Detectable Plastics Actually Saves Money
Contact us for more information on these Metal Detectable Plastic and X-Ray detectable plastic products. Blue Sheet and Rod are available in Acetal, Delrin®, Nylon, PBT – Polyester, and more. The special ‘triple detectable’ grades are currently produced in Acetal (Tecaform® UD Blue) and PBT – Polyester (Hydex® 4101 UD Blue). More materials are in final stages of development. Contact us for your special requirements.
Gehr Plastics Announces Huge 24″ Diameter Acetal Rod
Gehr Plastics is an industry leader in large high performance plastic materials. They announced at this years IAPD Conference in San Diego, the new production of 24″ diameter (600mm) Natural Copolymer Acetal Rod.
Being an industry leader is more than making the largest material, it is also about making the best quality material. Gehr Plastics is ISO 9001 and ISO 14001 approved and certified, guaranteeing a consistently high quality product. The product line that Gehr Plastics produces is also quite large. The materials include: ABS, Acetal (POM-C and POM-H), HDPE, Kynar, Noryl, Nylon, PEEK, PEI, Polypropylene, Polysulfone, PPO, PVC (Type 1, Type 2 and CPVC), PVDF and Ultem materials. All of these materials are available in a wide range of sizes, and yes, some of the largest.
Gehr Plastics Long History
Gehr Plastics has been leading the industry in innovation since 1932, and is now in the third generation of family owned and operation. From the wide range of materials to the extremes in size range, this is cutting edge performance from a family run company. They also released a web-app for picking plastic materials, Gehr Plastic Selection Tool, and it is also available for mobile devices. This comparison tool compares not only plastics, but metals as well, for a great look at the best physical properties for an application.
While quality and size are keystones to excellence, Gehr Plastics is also interested in materials that the rest of the industry has not
Large Cast Nylon Type 6 Rod
considered. Over the last several years, Gehr has produced some PLA materials (made from plants) and even a Clear Nylon Rod for higher temperature sight-glass applications. These are just a few of the cutting edge areas that Gehr Plastics is leading in this industry.
Industrial Plastics is Master Distributor
Gehr Plastics materials are sold through a tight network of Master Distributors throughout the United States. Industrial Plastic Supply, Inc. of Anaheim, CA is proud to be one of the top selected suppliers of these innovative materials. Contact us for any of these high quality and wide size range materials, call us @ 866-832-9315 or send us a note here.
Since 1975 we have provided large diameter plastic rods and thick plastic sheets, plates, slabs and blocks. One of our long time ‘secret’ sources has been Gehr Plastics. Since 1932 the Gehr family has owned and operated the Gehr Plastics company. They are a worldwide leader in semi-finished plastic shapes in thermoplastics, primarily sheet and rod. The headquarters for Gehr Plastics is in Mannheim, in south western Germany. For almost 30 years, Gehr Plastics has had production facilities in the Philadelphia area, providing the USA with the same high quality plastic shapes.When we mention large diameter rod, we mean it! Gehr can produce plastic rod up to almost 20″ diameter in several grades of plastic. They also produce sheet plastics up to 8″ thick, and make the largest materials of most manufacturers of plastic sheets and rods.
At Gehr Plastics, Quality Engineering Plastic Comes First
Our first purchases with Gehr Plastics was in the PVC rod family. Once again, they make huge cross sections in many materials, including the PVC rod. Many manufacturers struggle with large sections of PVC rod because keeping it void free throughout the large diameter is very difficult. Not for Gehr Plastics, they specialize in engineering plastic materials. We have chosen this high quality manufacture for their exceptional product quality. We know the demands of our client base, and only choose the best factories to supply our products. Gehr is definitely one of the premier plastics producers in the world. While the quality of the PVC rod is excellent, the rest of the Gehr Plastics product line is also some of the best plastic semi-finished shapes available in the market place. Here is a list of some of the many materials that Gehr Plastic produces:
14 inch Natural Polypropylene Rod produced by Gehr Plastics, the largest domestic plastic rod currently in production. 12″ diameter UHMW rod from Roechling Plastics, Industrial Plastic Supply is master distributor for both of these manufacturers.
And a new and exciting product – Clear Nylon Rod (Contact us for more information)
Many of the above items are also available in sheets, plates, slabs or blocks.
Gehr Plastics – one of our engineering plastic partners
We have been proud to offer the complete line of plastic rod, sheet, slab, plate and block from Gehr Plastics, and consider them a highly valued partner in supplying these engineering plastic materials to you, our valued client. For more information on the size range, availability and pricing on these and other plastic materials,click hereor call us at 866-832-9315