skip to content
CALL (866) 832-9315
Request a Quote
Worlds Largest Acetal Rod Made By Gehr Plastics

Worlds Largest Acetal Rod Made By Gehr Plastics

by | Sep 29, 2015 | Choosing A Plastic Material, High Performance Plastics, Mentor Nuggets, New Materials

Gehr Plastics Announces Huge 24″ Diameter Acetal Rod

Gehr Plastics is an industry leader in large high performance plastic materials. They announced at this years IAPD Conference in San Diego, the new production of 24″ diameter (600mm) Natural Copolymer Acetal Rod.24" diameter Natural Acetal Copolymer Rod

24″ Diameter Is Worlds Largest Acetal Rod

Gehr Plastics has been an innovator in the large cross section plastics market. This new 24″ diameter (600mm) is the Worlds Largest Copolymer Acetal Rod. They also produce a Copolymer Acetal Sheet that is 8.0″ thick, also the Worlds Largest.

Being an industry leader is more than making the largest material, it is also about making the best quality material. Gehr Plastics is ISO 9001 and ISO 14001 approved and certified, guaranteeing a consistently high quality product. The product line that Gehr Plastics produces is also quite large. The materials include: ABS, Acetal (POM-C and POM-H), HDPE, Kynar, Noryl, Nylon, PEEK, PEI, Polypropylene, Polysulfone, PPO, PVC (Type 1, Type 2 and CPVC), PVDF and Ultem materials. All of these materials are available in a wide range of sizes, and yes, some of the largest.

Gehr Plastics Long History

Gehr Plastics has been leading the industry in innovation since 1932, and is now in the third generation of family owned and operation. From the wide range of materials to the extremes in size range, this is cutting edge performance from a family run company. They also released a web-app for picking plastic materials, Gehr Plastic Selection Tool, and it is also available for mobile devices. This comparison tool compares not only plastics, but metals as well, for a great look at the best physical properties for an application.

While quality and size are keystones to excellence, Gehr Plastics is also interested in materials that the rest of the industry has not

Large Cast Nylon Type 6 Rod

Large Cast Nylon Type 6 Rod

considered. Over the last several years, Gehr has produced some PLA materials (made from plants) and even a Clear Nylon Rod for higher temperature sight-glass applications. These are just a few of the cutting edge areas that Gehr Plastics is leading in this industry.

Industrial Plastics is Master Distributor

Gehr Plastics materials are sold through a tight network of Master Distributors throughout the United States. Industrial Plastic Supply, Inc. of Anaheim, CA is proud to be one of the top selected suppliers of these innovative materials. Contact us for any of these high quality and wide size range materials, call us @ 866-832-9315 or send us a note here.

Comparing ABS to Acetal Sheets and Rod

Comparing ABS to Acetal Sheets and Rod

by | Mar 11, 2013 | Choosing A Plastic Material, Material Comparison, Mentor Nuggets, Performance Plastic

Acetal Copolymer Sheet vs. ABS Sheets and Rods

Acetal Copolymer and ABS (Acrylonitrile-Butadiene-Stryene) have some similar properties but are really very different materials. They similarities are: high impact strength, ease of machining with standard cutting tools and good mechanical properties. They are also both FDA compliant and are both good substitutes for brass. They also have great water absorption resistance and good electrical properties. Both materials are good for some of the same applications but certainly not all. Listed below are some of the major differences.

ABS Sheet and Rod InformationABS - Acrylonitrile Butadiene Styrene sheet and rod

  • ABS comes as Natural (straw) and Black color in Plate, Slab, Sheets and Rods, and thin sheet (.040″ – .250″) it is available as White or Black with a textured surface one side. It can be cut from 48″ X 96″ sheets into strip, panels or pieces.
  • ABS is formable. ABS is a great thermo-formable material while Acetal is not. Acetal is used more for machined parts such as gears and screws. ABS is great for molding and shaping parts from vacuum to heat forming. Excellent for model building and prototype projects.
  • ABS is easily bondable (similar to PVC). ABS can be bonded or welded to itself. Because Acetal is self lubricating, it is not possible for anything to stick to it unless etching is done – therefor it is not bondable.
  • ABS is a great material for painting and silk screening. While Acetal can not be painted or silk screened unless it has undergone Corona Treating (a flame surface treatment), but if treated will nice paint or screened surface.
  • ABS has better chemical resistance than Acetals. Both are attacked by acids like sulfuric, but ABS has a wider range of resistance to chemicals like aqueous acids, alkaline and alcohol. Acetal will degrade when exposed to such chemicals as chlorine and alkaline.
  • Specialty grades of ABS are available, including: Glass Filled, Static Dissipating, and Fire Retardant Grades (like Royalite – R59)

ABS Typical Properties Table

General PropertyASTM Test
Value
Specific GravityD79211.08 – 1.25
Tensile StrengthYield D638
4,100
Izod Impact – NotchedD2567.7
Hardness – RockwellD785R105
Deflection Temp @ 264psiD648177
Co. Thermal ExpansionD6965.3X10-54.6 -5.5X10-5

Acetal Copolymer and Homopolymer Sheet and Rod Information

The structure of ABS resin used in ABS Rod and ABS Plate

ABS Resin Structure

  • Acetal is the better machining plastic, considered the best machining plastic material. Because of its durability and wear resistance, Acetal is an excellent choice for producing a wide variety of parts that require high wear resistance over a wide period of time. When machining to tight and specific tolerances, Acetal is ideal.
  • Acetal has low co-efficient of friction. Due to its self lubricating properties, it is a great material for sliding and wear applications. This material provides years of maintenance free bushings and bearings.
  • Acetal sheet is produced from .062″ – over 6″ thick and sheet sizes of up to 48″ X 120″ as standard. The standard color for Acetal and Delrin is Natural (a deep milky white) and Black. Some colors are available as Medical Grade, and can be obtained in limited sizes. These sheet are available cut to: slabs, blocks, plates, slabs and blocks.
  •   Acetal (Polyoxymethylene) can be both a homopolymer and a copolymer.  The homopolymer acetal has a repeating chain of one atom while the Acetal copolymer has two atoms forming a repeating chain.  Dupont™ Delrin® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.

Acetal – Delrin Properties Table

General PropertyASTM TestTypical Value Unfilled  Homo-PolymerTypical Value Unfilled Co-Polymer
Specific Gravity D7921.421.40
Tensile Strength YieldD6389,600 – 11,0009,000 – 10,200
Tensile ModulusD638450,000400,000
Izod Impact – NotchedD2561.21.0
Hardness – RockwellD785M94M90
Deflection Temp @ 264psiD648257220
Deflection Temp @ 66 psiD648347335
Water Absorption @ 24 hrs %0.240.25
Co. Thermal ExpansionD6966.83X10-55.4X10-5

ABS and Acetal – Similar, but very different materials

Both of these materials possess excellent qualities and have a wide range of different uses. Acetal is great for machining, while ABS is great for forming and bonding. They both can be used for machined parts and are great choices for food contact and electrical applications. These two materials are both strong and durable plastics, but one might be better than the other for a specific job. When picking the right plastic, it is important to compare plastics and their specific properties to make sure the material won’t fail and that your job will be successful.

Contact us for additional information, call us at 866-832-9315 or contact us here. Consider Industrial Plastic Supply for all your plastic needs, we want to be your go-to plastic supplier.

**Note:  Delrin® is a registered Trademark of Dupont