skip to content
CALL (866) 832-9315
Request a Quote
Plastic Rod and Round Rods

Plastic Rod and Round Rods

Huge in stock inventory of Performance Plastic Rod

Plastic Rod and Round Rods

Specializing in plastic round rod and rods (aka: plastic dowel, plastic pin and plastic round bar); Industrial Plastic carries a huge variety of materials in round rod. Most materials are available in 96″ or 120″ lengths, however we normally cut these rods for shipment via UPS. Our plastic manufacturers are some of the best and largest in the industry and make the finest plastic rod and round rods available. We source only the best materials from American sources without any imports from China. Our plastic rods have the least amount of residual stress in the industry – providing the most consistent plastic rod, and thus the best finished parts.

Why chose Industrial Plastic Supply for your Plastic Rod and Round Rods

  • Huge selection of plastic rod materials
  • Most plastic round rod materials and sizes are sold by the foot (above 1.0″ diameter) and are in stock
  • Cut to length plastic rod, round rods, dowel, pin and round bar
  • Most variety of plastics available in round rod stock
  • Many materials available in up to 10″ diameter in stock (some materials available over 20″ diameter)
  • Plastic round rod generally starts at .250″ diameter (some materials available smaller)

Here’s a listing of the most popular plastic rod and round rods available:

ABS
Acetal/Delrin
Acrylic
Delrin/Acetal
Hi-Impact StyreneWide variety of performance plastic materials in round rod
Laminates (Paper, Canvas, Linen, G-10, FR-4)
Noryl – PPO
Nylon – Polyamide
PEEK
Polycarbonate (Makrolon – Lexan)
Polyester (PET – PBT)
Polyethylene (HDPE and LDPE)
Polypropylene
PVC
PVDF (Kynar)
PTFE- TFE
UHMW
Ultem – PEI

Still not sure which product is the proper material for your application, consult our free Plastic Materials Selection Guide. We stock a large inventory of most major high performance plastic materials, mechanical plastics and engineering plastics. Stop by or call us to see if we have the materials you need in our inventory.

If there is a material not listed, please call. It might be in stock, but not on the website. While this is a large list of materials, we do stock dozens of additional materials in plastic round rod. Contact us today for your plastic rod requirements.

Acrylic – PMMA

Acrylic – PMMA

IPS-acrylic

Acrylic (PMMA)

Cast and extruded sheets and rods available

Commonly Known As: Lucite®, Optix®, Acrylite®

This material is used frequently in skylights, towel holder, bank glazing, aircraft canopies, shelves and numerous display applications.

Acrylic is a great material for producing small panels to large signs, bent part, vacuum formed parts and bonded or glued boxes.

Acrylic bonds extremely well, and can be made with solvent cements and will yield crystal clear joints. A widely used and manufactured material, and called by many trade names, such as: Optix®, Acrylite®, Lucite® L, Plex® and several other brand names.

Acrylic, Acrylite, Lucite, Plexiglass Fabricated Boxes

This material is an excellent choice for windows, POP displays, heat formed parts. A natural for use in replacement of glass. High impact strength in a beautiful package. One of the most widely used resins. Wonderful to work with comes with masking on two sides to protect during fabrication and handling. Cleans well with soft cloth and mild soap and water, please do not use harsh chemicals or abrasive while cleaning.

  • Excellent clarity- more than glass at over 93%
  • Exceptional UV Resistant
  • Half the weight of glass and 10 times the impact strength
  • Very good fabrication, cutting and finishing
  • Acrylic is ITAR compliant, and Acrylic is RoHS compliant
  • Acrylic for LED’s are also available.

Frequently used in:

  • Displays and POP products
  • Skylights and Signs
  • Bent, strip heated, vacuum formed
  • Attractive finished goods for the home
  • Glass replacement- glazing / windows

Material Available As

Sheet:
.030″- 36″ X 48″
.062″- 48″ X 72″
.125″- 4.0″ up to 48″ X 96″

Rod: .125″ – 6″ Dia. in cast or extruded up to 72″ long

Tube: 1.25″ – 24″ OD with .125″-.500 wall thickness up to 72″ long

GeneralPropertyASTM TestTypicalValue
SpecificGravityD7921.19
TensileStrength YieldD63810,000
Tensile ModulusD638400,000
Izod Impact – NotchedD2560.4
Hardness – RockwellD785M94
DeflectionTemp @ 264psiD648210
Acrylic Sheet by Plaskolite

These properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed nor implied.