CALL (866) 832-9315
Request a Quote

PTFE – Polytetrafluoroethylene

thick-white-plastic-sheet

PTFE – Polytetrafluoroethylene

TFE, PTFE, FEP, PVDF, ETFE, ECTFE, PFA, PCTFE and other Fluoropolymers


Virgin PTFE Sheet and PTFE Rod

Virgin PTFE material is used frequently as a bearing or non-stick surface. It is an excellent choice for caustic fluid handling valves and fitting. Massive size range in  extruded rod, molded rod, tubular bar and thin sheet, plate and film. PTFE is also known as: Fluon®, Diakin®, Flouroplastic®, Fluoropolymer®, Neoflon®, Polyfon®, Chemfluor®, and more. PTFE plate, sheets, rods, strip, slab, block and tubes are normal stock items. The entire range of Fluorocarbon materials are high heat and chemical resistant performance plastics.

Other Fluorocarbon Based Materials We Supply in Sheet, Plate and Round Rod: FEP – Fluorinated Ethylene Propylene; PVDF – Poly Vinylidene Difluoride (Kynar®, Tecaflon®, Sustatec® and more); ETFE – Polyethylenetetrafluoroethylene (Tefzel®); ECTFE – Ethylene Chlorotrifluoroethylene; PFA – Perfluoroalkoxy; PCTFE – Polychlorotrifluoroethylene (formerly KEL-F® or Neoflon®)

Virgin-PTFE-sheets-and-rods

Why you should use PTFE (Fluoropolymers):

  • Very slippery and non-stick
  • Wear resistance
  • 500 degrees F continuous use temperature
  • Excellent chemical resistance
  • Very easy to machine and fabricate
  • PTFE Rod available from .125″ – 6″ as standard
  • Larger sizes are molded per order
  • PTFE Sheet – Film from .005″ – 3″ thickness
  • PTFE Molded Tubing- Vast sizes are available – made to order
  • PTFE is ITAR compliant, and PTFE is RoHS compliant

Frequently used in:

  • Seals, gaskets and stem valves
  • Wear and slide machined parts
  • Chemical resistant fixtures
  • Pump parts and manifolds- from PTFE Rod
  • Scientific aircraft and electronic parts
  • Steam and high temp seals – from PTFE sheet

Material Available As:

PTFE Sheet: .062″ – 4″ in Natural (White) in 48″ X 48″

PTFE Rod: .125″ – 6″ Diameter Natural (White) in 60″ Lengths

PTFE Film: .001″ – .062″ in Natural (White) in 12″ Wide (other widths – require Special Order)

Typical Resin Properties:

General PropertyASTM TestTypical Value
Specific GravityD7922.14 – 2.24
Tensile Strength YieldD6382,500 – 6,000
Tensile ModulusD63880,000
Izod Impact – NotchedD2563.0
Hardness – RockwellD785D50 – D65
Deflection Temp @ 264psiD648150
Deflection Temp @ 66 psiD648250
Co. Thermal ExpansionD6965.5X10-5
These properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed nor implied.

7 Things You Must Know When Choosing Your PTFE Sheet Suppliers

7 Things You Must Know When Choosing Your PTFE Sheet Suppliers

How to choose your PTFE Sheet Suppliers

Choosing a PTFE – TFE Sheet Supplier can be difficult, confusing and potentially costly. There are many industries and applications where PTFE – TFE Sheet materials are used, and many providers that want to fill this need. However, it can be difficult to find a supplier that meets all of your business’ PTFE – TFE Sheet needs. To help you choose the supplier that is right for your business, we have compiled this list of 7 things you must know when picking PTFE – TFE Sheet Suppliers.

Virgin PTFE sheets, slabs and round rods1. PTFE – TFE is available in many shapes and sizes

Polytetraflouroethylene (PTFE) can be ordered in many different forms, including rods, sheets, blocks, strips, slabs and tubes. As your business grows, you may need access to one or more additional configurations – or perhaps your business is already using multiple configurations. Choose the proper PTFE Sheet Supplier that can meet not only your current needs, but future needs as well. You can view further information about the shapes and sizes as well as and resin properties on our PTFE – TFE information page here.

2. There are a variety of PTFE – TFE Sheet thicknesses to choose from

It is important to have access to multiple sheet thicknesses, and convenient and cost effective to access them all from one Sheet Supplier. That’s why Industrial Plastic Supply offers sheet thicknesses ranging from .005″ to 3.0″, and rod diameters from .125″ to 6.0″. Film is also available. As with in stock availability, your PTFE Sheet Supplier should also be able to meet all of your Sheet thickness needs. Standard sheet sizes are 48” X 48”, and films generally are stocked in 12” wide rolls.

3. Not all PTFE materials are created equal

Some PTFE – TFE Sheet Suppliers order materials from ‘who ever they can get it from’ on an as-needed basis. This brings the question of quality and consistency to mind. There are many manufacturers, including some from China and Russia with questionable quality ratings and machinability. Before committing to a quality PTFE Sheet Supplier, make sure that the supplier is using a reputable manufacturer, and that the quality of material meets your needs. Getting stuck with a poor quality, difficult or impossible to machine block of PTFE can be time consuming and costly.

4. Minimum material order amounts matter

Large Sheet Suppliers and other plastic suppliers often have high minimum order requirements. This makes sense for high volume applications, but for small businesses, or any business in the clutch, it may be necessary to request a smaller total order. Rather than work with multiple PTFE or Plastic Sheet Suppliers based on order size, choose a supplier that can service any order whether large or small. Industrial Plastic Supply has a low minimum material order of $20.

5. Many suppliers do not keep inventory in stockptfe thread sealant

Just like Grandpa used to say, “You can’t sell from an empty cart”. 

Buying your materials from a plastic ‘broker’, means you may have to wait while they try to find the materials to fulfill your requirements. It may also mean that you get the quality of material that they can find quickly. While this may be acceptable for materials that are rarely ordered, your PTFE Sheet Supplier should have your business’ most commonly used materials on hand. This avoids delays and ensures the quickest possible turnaround times on your important orders, and materials from stock means a quality product for your parts.

6. Industry knowledge is critical

You want a Sheet Supplier that not only can deliver your materials, but answer any questions you may have, including the tough ones – whenever they arise. Finding a quality PTFE Sheet Supplier with expert knowledge and great availability will save your business headaches in the long run. Industrial Plastic Supply’s highly trained staff has an average of nineteen and a half years of experience in the plastic industry, and are only a phone call or e-mail away.

7. Choose a supplier with focus

A focus on industrial grade plastic supplies ensures that a supplier is specialized and knowledgeable enough to be your PTFE Sheet Supplier. By focusing on plastics, such a supplier will be dedicated to your mechanical plastic Sheets, Rods, Tube and other shape needs, no matter the application, and no matter how your business changes. Your important orders will be processed timely and efficiently. Since 1975, Industrial Plastic Supply has focused on the mechanical and machinable plastics market, and nothing else. For more information on PTFE Sheets or other plastic materials, contact Industrial Plastic Supply, 866-832-9315. We will work to earn your business. Also, compare PTFE with UHMW or read our post UHMW Sheet versus PTFE Sheets; or read our post How to use PTFE Rod for ideas.

Topic: PTFE Sheet Suppliers