Delrin® Homopolymer Acetal compared with Acetal Copolymer
Many of our clients assume that Delrin® rod and Acetal rod are the same thing. This is not true.
Delrin® is the trade name for Homopolymer Acetal made by Dupont. Dupont™ Delrin ® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
This is the most recognized of all trade names for Acetal materials, but not the only available Acetal material.
The Copolymer Acetal resin is produced by a wide variety of large plastic manufacturers, BASF is probably one of the largest and most well known. Some main resin names are: BASF Ultraform® H4320, Kepital® F10-02, Hostaform® M25 and many others.
While Delrin® Homopolymer Acetal is a wonderful material, in a larger cross sections Homopolymer can exhibit center line porosity, or ‘soft centers’. This can sometimes be seen with the naked eye, and is a darker white in a normally milky white natural colored material. This center line porosity can cause problems in some applications. This porosity can cause leakage of fluid if under pressure, or soft center’s of homopolymer rod and sheet.
This should not stop you from considering Delrin® Homopolymer Acetal though. Many other properties of the homopolymer resins are superior to the copolymer resins. These properties are:
|Tensile Strength Yield||D638||9,600 – 11,000||9,000 – 10,200|
|Izod Impact – Notched||D256||1.2||1.0|
|Hardness – Rockwell||D785||M94||M90|
|Deflection Temp @ 264psi||D648||257||220|
|Deflection Temp @ 66 psi||D648||347||335|
|Water Absorption @ 24 hrs||%||0.24||0.25|
|Co. Thermal Expansion||D696||6.83X10-5||5.4X10-5|
Some key properties for homopolymer acetal are: higher tensile strength, increased Izod impact, higher deflection temperatures and it is slightly harder. The co-efficient of thermal expansion is a bit higher, and needs to be considered when designing a new part. Extruded Delrin® brand homopolymer resin material also comes in several resin variations, including: Delrin® 150 and Delrin® 507, contact us for details. Dupont™ Delrin® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
Many of our clients prefer the homopolymer rod and sheet for small machined parts. This is due to the increase in a few key properties, and of course brand recognition. Some of our major brand names for quality Copolymer Acetal (POM-C) sheet and Rod include: Tecaform AH®, Sustarin C®, ZL 900® and Pomalux®.
The Acetal family of plastic resins are excellent for wear resistance, great mechanical strength, and superior machining properties. It is available in a huge range of sizes and shapes. Click here for more details on Acetal – Homopolymer Acetal Rod, and sometimes referred to as plastic dowel. We also have the capacity to supply colored Acetal Copolymer or Delrin® Homopolymer Acetal rod; click here from more details on the colored Acetal material.
Please contact us for more details on these and other plastic materials. For a comparison chart of plastic materials click here: Plastic Materials Selection Guide
**Note: Delrin® is a registered Trademark of Dupont