skip to content
CALL (866) 832-9315
Request a Quote

PTFE – Polytetrafluoroethylene

performance-plastics-inventory

PTFE – Polytetrafluoroethylene

TFE, PTFE, FEP, PVDF, ETFE, ECTFE, PFA, PCTFE and other Fluoropolymers

Virgin PTFE Sheet and PTFE Rod

Virgin PTFE material is used frequently as a bearing or non-stick surface. It is an excellent choice for caustic fluid handling valves and fitting. Massive size range in  extruded rod, molded rod, tubular bar and thin sheet, plate and film. PTFE is also known as: Fluon®, Diakin®, Flouroplastic®, Fluoropolymer®, Neoflon®, Polyfon®, Chemfluor®, and more. PTFE plate, sheets, rods, strip, slab, block and tubes are normal stock items. The entire range of Fluorocarbon materials are high heat and chemical resistant performance plastics.

Other Fluorocarbon Based Materials We Supply in Sheet, Plate and Round Rod: FEP – Fluorinated Ethylene Propylene; PVDF – Poly Vinylidene Difluoride (Kynar®, Tecaflon®, Sustatec® and more); ETFE – Polyethylenetetrafluoroethylene (Tefzel®); ECTFE – Ethylene Chlorotrifluoroethylene; PFA – Perfluoroalkoxy; PCTFE – Polychlorotrifluoroethylene (formerly KEL-F® or Neoflon®)

Virgin-PTFE-sheets-and-rods

Why you should use PTFE (Fluoropolymers):

  • Very slippery and non-stick
  • Wear resistance
  • 500 degrees F continuous use temperature
  • Excellent chemical resistance
  • Very easy to machine and fabricate
  • PTFE Rod available from .125″ – 6″ as standard
  • Larger sizes are molded per order
  • PTFE Sheet – Film from .005″ – 3″ thickness
  • PTFE Molded Tubing- Vast sizes are available – made to order
  • PTFE is ITAR compliant, and PTFE is RoHS compliant

Frequently used in:

  • Seals, gaskets and stem valves
  • Wear and slide machined parts
  • Chemical resistant fixtures
  • Pump parts and manifolds- from PTFE Rod
  • Scientific aircraft and electronic parts
  • Steam and high temp seals – from PTFE sheet

Material Available As:

PTFE Sheet: .062″ – 4″ in Natural (White) in 48″ X 48″

PTFE Rod: .125″ – 6″ Diameter Natural (White) in 60″ Lengths

PTFE Film: .001″ – .062″ in Natural (White) in 12″ Wide (other widths – require Special Order)

Typical Resin Properties:

General PropertyASTM TestTypical Value
Specific GravityD7922.14 – 2.24
Tensile Strength YieldD6382,500 – 6,000
Tensile ModulusD63880,000
Izod Impact – NotchedD2563.0
Hardness – RockwellD785D50 – D65
Deflection Temp @ 264psiD648150
Deflection Temp @ 66 psiD648250
Co. Thermal ExpansionD6965.5X10-5
These properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed nor implied.