UHMW Polyethylene material is used frequently in a self lubricating bearing surface or slide type application. In fact, many of our clients refer to UHMW as ‘machinable solid wax‘ sheet. The wear resistance of this awesome plastic will impress you, as it is the most wear resistant of any unfilled material available.UHMW Polyethylene Timing Roller
Resistant to most common chemicals. Commonly replaces aluminum, Acetals, and Nylons. Used frequently in Food and Dairy Processing, Material Handling, Fluid Handling, and Automotive. UHMW is great for wear strips, rub rails, guides, conveyor parts, feed screws, and many more applications.
UHMW Rod is machined to make pulleys, wheels, and washers. UHMW sheet is machined to produce FDA approved slip surfaces, food process fixtures, and scrapers. Some popular brand or trade names are Polystone® M, Lennite®, Tivar®, Duravar®, Gardur®, Solidur®, Polyslick®, UHMV®, Polyfend®, and Durasurf®.
We stock a very large inventory of UHMW performance plastic sheets and rods.
Superior wear resistanceVery low moisture Absorption
High chemical resistance
Very low cost vs. physical properties
This material is excellent wearing and very abrasion resistant – one of the best materials made for these properties. Promotes the flow of bulk material (sand, soy beans, coal, ect). Superior material for wear strip, conveyor rails, slide plate, wear pads.
Very low moisture absorption
FDA, USDA and 3-A dairy compliant
Superior wear resistance
Chemically resistant to chlorine and caustic/acidic cleaning agents
Offers excellent strength, rigidity and machinability
UHMW is ITAR compliant, and UHMW is RoHS compliant
Frequently used in:
Food, Dairy and Packaging equipment
Timing screws, wear and slide machined parts
Star wheels, idler sprockets and guide rails
FDA and 3-A approved material for Scraper blades
Hopper, chute lining, feeder lines and wear plates
Materials Available As
UHMW Sheet:
.125″ – 4″ in Natural (white) up to 48″ X 120″
Black available in many thicknesses
Some sheet available up to 8″ thick contact for details.
UHMW Rod:
.250″ – 8″ diameter in Natural (White) and in some diameter Black up to 120″ lengths
Larger diameter available in non-FDA grades, contact for details.
UHMW Film:
.005″ – .060″ in up to 48″ wide Natural with and without adhesive
Properties are for evaluation purposes only. This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed nor implied.
A common standard item in the metals industry is ‘strip’. Strip is normally a piece of material that is 1/16″ – 3/8″ thick and 1.0″ – 4.0″ wide, although thicker and wider materials can also be referred to as strip. The metals industry produces various metals in these sizes of strip. In the plastics industry, strip is something we cut from larger sheets. The sizes are the same as listed above, but are cut from 48″ X 96″ or 48″ X 120″ sheets.
The a few of the most common plastics materials we cut to plastic strips are:
Most plastics can be cut to these strip sizes, with various lengths available depending on type of material. In some materials and in some sizes, depending on quantity, special run to size plastic strip is available. These special run plastic strips can be run to almost any length. Specifically, in the UHMW and PTFE materials, much longer lengths are available in rolls of material. The UHMW can be purchased in standard and adhesive back varieties. This UHMW with adhesive is a commonly used item in the wear strip applications because of its ease of installation. A large market for this kind of strip is in the food processing industry for all wear points and to reduce noise in the plant. Some of these same sizes with adhesive on the back are available in the PTFE, and are available in long tape style rolls. In some cases, colors other than natural are available, contact us for details.
Plastic Strip and Strips are available in special sizes
With the massive range of plastics available, and most of these materials available to be cut to strips, the nearly unlimited amount of choices in plastic strip availability make this post difficult to be all inclusive. Great material for the industrial, food processing, material handling, automotive and recreational industries.
Most plastics are available in large sheets, and we can cut these sheets to strip for you. Also, depending on the material, size and quantity, we can custom extrude your strip in longer lengths and to your requirements. Decide on a type of plastic, determine the size and quantity, and give us a call. Use your imagination, we can help.
If you have a project where strips would be ideal, please contact us to see if the type of material you need is available in the strip configuration that would be beneficial. Call us at: 866-832-9315 or drop us an email and we will be happy to go to work on your requirement.
Topic: Plastic Strip and Plastic Strips – Strip Plastics
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OkPrivacy policy