Gehr Plastics has been a major global manufacturer in the plastic sheet and rod industry since 1932. During this period, Gehr has become a leader in a variety of product lines, and also become known for very large sizes in both sheet and rod. Currently Gehr can produce Acetal rod up to 20″ in diameter and sheets up to 8″ thick. Some of the many plastic materials the Gehr produces:
Radel Rod is produced in many medical grade colors
Being innovative also means looking forward. Gehr was selected as the Bioplastics manufacturer of the year in 2008, partly for the new line of plastic materials which have a bio base. These materials have a variety of bio based forms, including: a PLA base, Cellulose based, Polyamide and Wood – Plastic Composite (WPC). One such material is ECOGEHR PLA-L which is a blend of polylactic (polylactic acid), some lignine, fatty acid and wax. This biopolymer is new to our industry and can be used in temperatures ranging from -22 °F to +140 °F.This complete line of materials is one of the only available in the plastic industry to be comprised of many renewable raw materials. Gehr leads the way in this exceptional and innovative product line.
ClearGehr Polyamide Rod
This brand new product is a Clear Polyamide rod. The outside surface is as extruded, and can be polished. This enables the production of a relatively clear sight glass quality material with most of the high end properties of Polyamide – Nylon material. We have supplied this material for small machined parts where neither Polycarbonate nor Acrylic would work well. Because of the natural inherit chemical resistance of Polyamide, this high end ClearGehr rod can out perform all normal transparent plastics. Give us a call to see if this new innovative product will work in your difficult application.
FDA Approved Wear Grade Acetal
Have you been looking for an extended wear Acetal material (like the PTFE filled Acetals – Delrin AF), but need it to be FDA approved? Then perhaps you should consider WearGehr. This proprietary filled Acetal material has excellent wear resistance, and retains the FDA approval of the base Acetal, unlike the PTFE filled Acetal materials which are not FDA approved. It is made in a blue color for easy identification, also it remains very machinable. Contact us for more information on this excellent high tech material.Call us at 866-832-9315 or send us a note here.
A newly released form of Filled PEEK is now available. This PEEK is filled with PTFE and is called Unitrex Lf20, and it is filled with 20% PTFE. This new grade of PTFE Filled PEEK plastic was originally produced by Nytef Plastics. It is an extruded thermoplastic that comes in both rod and sheet form. This grade has significantly improved properties over the standard unfilled grades of PEEK. The PTFE filler provides excellent wear properties and has a very low co-efficient of friction, which makes this a great material for sliding and wear applications, and is made to last for long periods of abuse. Unitrex Lf20 has great machinability and dimensionally stability. It has a wide range of uses in such fields as medical, semi-conductor, and aerospace seals, where standard PEEK is too rigid. These properties enable this material to replace Polyimide (Vespel®) and PCTFE (formerly Kel-F) in many applications of high chemical resistance and the ductility for use in seals. This Filled PEEK works extremely well in Medical, Semi-Conductor and Aerospace Seal applications.
PTFE Filled PEEK vs. PTFE Filled Acetal
Comparable to Lf13 which is 13% PTFE filled Delrin® (Delrin® AF), which is also good for most of the same types of applications but cannot withstand the high temperatures than that of Unitrex Lf20. The PTFE Filled PEEK has a melting point of 650 degrees F while the PTFE Filled Delrin® – Unital® Lf13 has a melt point of 347 degrees F, making both materials high temperature plastics.
Because the Nytef Unitrex Lf20 is filled with PTFE (which has the lowest co-efficient of friction of any plastic), it is ideal for sliding and wear applications. It also has a kinetic and static friction resistance of 0.1 which makes it the perfect choice for jobs were heat from friction should not be generated and part longevity is critical. Unitrex Lf20 offers superior properties to many other plastics, such as high heat and chemical resistance but also great friction resistance along with improved properties to make it a great plastic for a wide spectrum of uses.
Why Change from Vespel SP-1 or PCTFE to Unitrex Lf20?
While this new PTFE Filled PEEK will not replace the Vespel SP-1 and PCTFE in all applications, it certainly will in many applications (see table for comparison). The main reason to make a change is, drum roll please, COST. The Unitrex Lf20 is up to 30% less expensive that the other materials. With similar and comparable properties, consider making the change.
Unitrex® Lf20 also exhibits a far superior chemical resistance to that of its Acetal counterpart due to PEEK having a far better range of chemical resistance to aqueous and organic environments as well as acids and alkalines. Acetal Copolymer tends to degrade when exposed to such chemicals like sulfuric acid and chlorine while PEEK only tends to be attacked by halogens and hydrocarbons such as in crude oils. For additional properties and to compare the Unitrex LF-20 to Dupont Vespel SP-1 and PCTFE see the table below. Here is a copy of the full data sheet on Nytef Unitrex Lf20.
Standard Properties Table
Properties
TestMethod
Unit
UnitrexLF20 Nominal Value
PCTFE(Kel-f) Nominal Value
VespelSP-1 Nominal Value
Specific Gravity
ASTM-D-792
1.42
2.1 – 2.14
1.43
Tensile Strength
ASTM-D-638
psi
11,500
4,800 – 5,300
12,500
Tensile Modulus
ASTM-D-638
psi
460,000
207,000
–
Flexural Modulus
ASTM-D-790
psi
500,000
180,000
450,000
Rockwell Hardness
ASTM-D-785
84-D
90-D
45 – 60 E
Melting Point
DSC
degress F
650
410 – 415
680+
Flammability
UL 94
@ 3.0mm
V-0
V-0
V-0
Kinetic Coef. of Friction
ASTM-D-1894
0.1
–
–
Static Coef. of Friction
ASTM-D-1894
0.1
–
–
For additional details on these and other materials, please contact us here or call us at 866-832-9315
Unitrex and Unital are registered trademarks of Polymer Industries Delrin and Vespel are registered trademarks of E.I. Dupont
Acetal Copolymer and ABS (Acrylonitrile-Butadiene-Stryene) have some similar properties but are really very different materials. They similarities are: high impact strength, ease of machining with standard cutting tools and good mechanical properties. They are also both FDA compliant and are both good substitutes for brass. They also have great water absorption resistance and good electrical properties. Both materials are good for some of the same applications but certainly not all. Listed below are some of the major differences.
ABS Sheet and Rod Information
ABS comes as Natural (straw) and Black color in Plate, Slab, Sheets and Rods, and thin sheet (.040″ – .250″) it is available as White or Black with a textured surface one side. It can be cut from 48″ X 96″ sheets into strip, panels or pieces.
ABS is formable. ABS is a great thermo-formable material while Acetal is not. Acetal is used more for machined parts such as gears and screws. ABS is great for molding and shaping parts from vacuum to heat forming. Excellent for model building and prototype projects.
ABS is easily bondable (similar to PVC). ABS can be bonded or welded to itself. Because Acetal is self lubricating, it is not possible for anything to stick to it unless etching is done – therefor it is not bondable.
ABS is a great material for painting and silk screening. While Acetal can not be painted or silk screened unless it has undergone Corona Treating (a flame surface treatment), but if treated will nice paint or screened surface.
ABS has better chemical resistance than Acetals. Both are attacked by acids like sulfuric, but ABS has a wider range of resistance to chemicals like aqueous acids, alkaline and alcohol. Acetal will degrade when exposed to such chemicals as chlorine and alkaline.
Specialty grades of ABS are available, including: Glass Filled, Static Dissipating, and Fire Retardant Grades (like Royalite – R59)
ABS Typical Properties Table
General Property
ASTM Test
Value
Specific Gravity
D7921
1.08 – 1.25
Tensile Strength
Yield D638
4,100
Izod Impact – Notched
D256
7.7
Hardness – Rockwell
D785
R105
Deflection Temp @ 264psi
D648
177
Co. Thermal Expansion
D696
5.3X10-54.6 -5.5X10-5
Acetal Copolymer and Homopolymer Sheet and Rod Information
ABS Resin Structure
Acetal is the better machining plastic, considered the best machining plastic material. Because of its durability and wear resistance, Acetal is an excellent choice for producing a wide variety of parts that require high wear resistance over a wide period of time. When machining to tight and specific tolerances, Acetal is ideal.
Acetal has low co-efficient of friction. Due to its self lubricating properties, it is a great material for sliding and wear applications. This material provides years of maintenance free bushings and bearings.
Acetal sheet is produced from .062″ – over 6″ thick and sheet sizes of up to 48″ X 120″ as standard. The standard color for Acetal and Delrin is Natural (a deep milky white) and Black. Some colors are available as Medical Grade, and can be obtained in limited sizes. These sheet are available cut to: slabs, blocks, plates, slabs and blocks.
Acetal (Polyoxymethylene) can be both a homopolymer and a copolymer. The homopolymer acetal has a repeating chain of one atom while the Acetal copolymer has two atoms forming a repeating chain. Dupont™ Delrin® is a popular acetal homopolymer brand name and the most commonly used acetal homopolymer.
Acetal – Delrin Properties Table
General Property
ASTM Test
Typical Value Unfilled Homo-Polymer
Typical Value Unfilled Co-Polymer
Specific Gravity
D792
1.42
1.40
Tensile Strength Yield
D638
9,600 – 11,000
9,000 – 10,200
Tensile Modulus
D638
450,000
400,000
Izod Impact – Notched
D256
1.2
1.0
Hardness – Rockwell
D785
M94
M90
Deflection Temp @ 264psi
D648
257
220
Deflection Temp @ 66 psi
D648
347
335
Water Absorption @ 24 hrs
%
0.24
0.25
Co. Thermal Expansion
D696
6.83X10-5
5.4X10-5
ABS and Acetal – Similar, but very different materials
Both of these materials possess excellent qualities and have a wide range of different uses. Acetal is great for machining, while ABS is great for forming and bonding. They both can be used for machined parts and are great choices for food contact and electrical applications. These two materials are both strong and durable plastics, but one might be better than the other for a specific job. When picking the right plastic, it is important to compare plastics and their specific properties to make sure the material won’t fail and that your job will be successful.
Contact us for additional information, call us at 866-832-9315 or contact us here. Consider Industrial Plastic Supply for all your plastic needs, we want to be your go-to plastic supplier.
**Note: Delrin® is a registered Trademark of Dupont
A frequent question is ‘Where are you located’, and we are happy to share our address.While we service the entire United States, our shipping warehouse is regional.
We are in Anaheim, California, and have been since 1975. Here is our street address:
Industrial Plastic Supply, Inc.
2240 Dupont Dr.
Anaheim, CA 92806
866-832-9315 or 714-978-3520
Our Fax number is: 714-978-2812
Thinking Nationally, Serving Locally
Providing local industrial clients high quality materials for over 37 years, we find that having a warehouse full of materials is a benefit to you, our client. The inventory is here, and we welcome you to come by for a visit. We service the entire USA on a daily basis, however, we still are a local company and can service your local needs today. You requested more stock of the items you need, and we have done our best to have the most popular materials in stock, with more on the way.
When selecting our location, we considered many factors, including: freeway access, central location, easy to find, etc. We picked Anaheim because it is in the center of Orange County. We are centrally located between Los Angeles County, Riverside County, San Bernardino and San Diego Counties. We have clients pick up here from Ventura County and even Santa Barbara Counties! We really are easy to find, right across the street from the ‘Big A’ – Anaheim Stadium where the Los Angeles Angels of Anaheim play ball.
Next time you are traveling in Orange County, we invite you to stop by and see the huge inventory of industrial, mechanical and engineering plastic sheet, plastic rod and tube we have here for you.
PTFE Rod is a remarkable product. PTFE – Polytetrafluoroethylene was discovered on April 6, 1938 by Dr. Roy Plunkett at the DuPont research laboratories. And this original PTFE was further developed by Dupont, and was released as a product in 1945.
This product is extremely chemical resistant, and can handle temperatures above 500 degrees. One of the first household uses for PTFE is the ‘PTFE Coated Frying Pan’. While this pan works very well, it is a different process than the PTFE Rod and Sheet we supply. It is a sprayed on coating that is almost black in color, where the pure PTFE Rod and Sheet is bright white in color.
What are some of the uses for PTFE TFE Rod?
Because PTFE exhibits high temperature and chemical resistance, it is commonly used in valve applications. From simple steam / hot water valves to high heat, caustic chemical valves in the fluid handling industries. This material is a semi-rigid to rigid plastic, and can be machined very easily – one of the easiest plastics to work with. The PTFE rod can be machined to very close tolerance, and in most small diameter rod it is supplied with a +.002″/-.00″ on the diameter (check for tolerance on your requested size). The chemical resistance is one of the key properties associated with the material. In sheet or thin sheet (film) PTFE is used as gasket material for similar high heat and chemical resistant flange and seals.
PTFE Rod
Since 1945 Dupont has been the world leader in producing PTFE resins. Over the last couple of years, with the global shortage of Fluorspar (a key ingredient in producing all Fluoropolymer Plastics) Dupont has made some changes to their product offerings. Included in this change is a discontinuation of the production of one of most common granular molding powder (resin) used in the production of PTFE Rod and Sheet. This has the industry in a panic, the remaining global suppliers of PTFE resin are scrabbling to fill the void left by this decision. What does this mean to you? If you are used to purchasing PTFE rod or sheet, you may find the base materials may not be from Dupont. Our suppliers have small amounts of the Dupont resin, but mostly are replacing their raw materials with molding powder from other manufacturers. It may be, in the very near future, that all PTFE rod and PTFE sheet may not be made from Dupont brand resin.
UHMW rod is also a very slippery plastic material, but it does not take the high heat the PTFE rod does.
If you are one of the many clients that need this material, please contact us for clarification, information, supply chain news and possible changes in sources of supply. Call us at 866-832-9315 or email us here.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OkPrivacy policy
