When choosing a plastic raw material, the first step should be to look for the material with the proper physical properties. PVC (Polyvinyl-chloride or Rigid Vinyl) is an amazingly strong and versatile material that has proven itself a champion in the ever growing demand for mechanical grades of plastic. We can see its wide versatility in the way it is used and how it can keep up with the rough conditions it’s put under. PVC Pipe has been shown to take a beating in construction sites and it serves its purpose underneath our front lawns for our sprinkling systems. There are many more ways this strong industrial grade PVC can be used.
PVC Sheet and Rod for a wide variety of industrial and mechanical applications
A standard industrial plastics, it is available as PVC Sheet or PVC Rod. The PVC, unlike other materials, is very easy to work with. It’s not necessary to buy expensive tools to get the job done. You can use the most of the same tools you would use on wood and steel. Unlike other materials, PVC can be kept cool easily using cold water or you can use an air compressor. Standard CNC equipment, punch machines, routers, drills and saws can all be used to shape PVC. If you wanted to seal and bond this material, that’s not a problem because like the PVC Pipe, the sheets and rods can be bonded with cements or heat welded. The cost of PVC is also lower than most other plastic materials that are harder to work with. So you can see why PVC should be on your short list of plastic materials.
Standard PVC sheet sizes and thicknesses for PVC Sheet
The standard sheet size for PVC is 48” x 96”. Some of you may know those measurements because that is also the standard size of drywall and plywood. Because PVC comes in the same sizes as other common materials it would be fairly easy to store. As for the thickness .062” – 3” are the most standard thicknesses, but it can be made thicker if needed. The material cuts and fabricates well, and we do offer cutting to your blank or precision sizes. We also cut the rest of the industrial and engineering plastics, including: Acetal/Delrin, Nylon, PEEK, Ultem, and dozens more; call for details.
PVC Sheets take a beating
PVC has many excellent properties, including the unbelievable UL 94 V-0 flame rating. This certification means that the Rigid Vinyl material is fire retardant, and is considered ‘self extinguishing. By now you are probably were thinking “PVC sounds great so far, but I wanted to paint and screen print on a material”, then have no fear because PVC Sheet and Sheeting is here! PVC is also known for its ability to hold paint and a screen print. It is heat bendable, vacuum formable in thinner gauges, and bondable to materials such as wood, paper and other plastics. Because of PVC’s many usages and qualities we even see it being use to create house hold items.
The material can be sanded, routed and you can eliminate scratches and scrapes by simply buffing or sanding them away. With PVC being so versatile and also low in cost, it’s no wonder why it is a top choice for manufacturing and engineering companies. Click here for
While you can purchase a piece of plastic from many different suppliers, there are some significant differences between these suppliers. Some of the main differences are in the manufacturers and the materials that you get supplied.
We see a wide range of materials and some drastically inferior grades of materials being sold to clients. Some materials have been produced too quickly or cooled too quickly causing a very high stressed plastic piece. These high stressed materials will warp, twist or crack when they get heated or during cutting. This material on the right is a piece of highly stressed Nylon. While cutting the material, our new customer had to stop the saw due to the severe warping and binding of the saw by this material. This new client brought this 24″ long part, and asked if we would cut it for him. We bought this part from him as an excellent example of a high stress plastic. (We did cut a quality piece of material to solve his problem).
One example of differences between manufacturers, is Gehr PVC rod is NSF 51 certified, while Simona PVC rod is not.
Other things you should consider when choosing a quality plastic supplier:
Quality of Materials
Origin of Materials
Huge In Stock Inventory of Plastic Rod
Expert Support
In Stock Materials
Cutting – Converting Services
Longevity – How Long Have They Been In Business (We started in 1975)
Product Knowledge and Experience Equals Quality Plastic Suppliers
We believe that providing quality products is only part of our duty to you. You have entrusted us to help with your requirements, and we believe we should be good stewards of this trust, all part of being a quality plastic supplier. A plastic sheet supplier should advise you if the material you are looking for is the ‘wrong’ material. Acrylic does not do well at 450 degrees. Styrene does not make a good chemical tank. HDPE and PTFE do not bond. These and many more ‘land mines’ are things we help our clients with everyday. We have an experienced client support team (plastic experts), and we value the opportunity to assist our clients with this experience. Go ahead, ask us a question – that is why we have a “Ask A Plasticologist” page on our website.
If you need help, from what are the properties of Acetal, to temperature range on Ultem, please contact us.We look forward to assisting you and all our clients. Feel free to contact us with any questions, concerns or requests – call us at 866-832-9315 or e-mail us here.
Is HDPE Sheet and Acetal Homopolymer Sheet the same?
Here is another popular question asked by our clients. Is HDPE the same as Acetal Copolymer / Delrin Acetal Homopolymer? No, they are two totally different materials. Although the natural color of both is a milky white to opaque white, and they do look a bit similar, they are not. (HDPE is milky white to almost translucent depending on thickness, and the Acetal materials are a more opaque white to slightly milky – once again depending on thickness . See picture below of .500″ thick samples of HDPE and Acetal sheets)
HDPE and Acetal – Some Differences
The HDPE sheet and rod is a softer material, and is commonly known for its FDA certification and used in numerous food applications, such as: one gallon milk jugs, cutting boards, colored water glasses/cups, and many, many more. While it can be machined, because it is a bit softer and lighter, the tolerances it can be machined to are not very tight. It is not bondable, so it makes a great non-stick surface for sticky foods and adhesives.
The Acetal Copolymer and the premium Delrin® Acetal Homopolymer also have FDA certification, and are used heavily in the food processing industry. This material is a more mechanical material and is used in bearing and wear applications, cams, feeder screws, etc. This material is can be machined to tight tolerances, and will wear for long periods without lubrication. Due to its exceptional wear properties, it is not bondable, thus requiring mechanical fastening or threads to assemble. It has a very low water absorption, and you will find it in your toilet tank as the white moving parts in the filler mechanism. It is an extremely popular material for machinists, as it works much like soft brass.
While HDPE Sheet and Acetal Sheet look similar, they perform quite a bit differently.
While both materials are FDA approved, are machinable and can be used to make rigid wear resistant parts, they are two different resins and have drastically different physical properties. Another major difference is in the weight of these items, HDPE sheet and rod material weighs about 35% less than the Acetal sheet and rod material. Please check the data sheets for more information to assist in proper material selection.Acetal Data Sheet and HDPE Sheet Data
Acetal is commonly known as: Delrin Homopolymer Acetal, Tecaform AH,Ensital, Unital, Pomalux, Ultraform and many more.
HDPE is also known as: Ultraethylux,Densetec, Polystone G, Fortiflex, Versadur, Hostalen, and many more.
Contact us for more details on the HDPE and Acetal families of plastic materials, e-mail us or call 866-832-9315 Topic: HDPE sheet and Delrin Sheet (Acetal Sheet)
Polyvinyl chloride (PVC) has shown its versatility and durability for decades. Its use in piping, sprinkler systems, the construction industry and other areas has made it a popular commodity. The industrial-grade PVC sheet has numerous applications in the manufacturing area. Its low cost, workability, easy bonding, corrosion and weather resistance make it an all-round choice of industry.
PVC is Easy To Work With
Regardless of the application, working the PVC sheet is easy and cost-effective using simple tools that are common in other applications such as wood and steel. The chemical composition of the PVC sheet makes edging and machining simple and straightforward, and usually makes cooling unnecessary. However, when cooling is needed, compressed air, water or other liquids can quickly cool the material. Industrial PVC can be shaped and formed by:
Saws
Drills (Hand-held or drill presses)
Routers
Punch machines
Standard CNC Equipment
It is also easily sealed and bonded to itself or using common industrial adhesives. The easy working and bonding of PVC sheeting make it an excellent choice for use in manufacturing and industrial applications. Couple that with its relative low cost and ability to use common tooling methods and PVC is an indispensable choice, and can replace more expensive materials such as: ABS, Acetal, Nylon and many more.
Several PVC Grades Available
PVC is available in several grades. The most common is the Type 1 Gray PVC – the standard commercial grade PVC for machining, bonding and painting. CPVC (Chlorinated Polyvinyl Chloride) is also available, and sometimes called Corzan® or Lam 2000®, and is a higher continuous temperature resistant material. The CPVC is normally a blue tinted clear color, and is also available in a FM4910 approved grade.We also supply the Type 2 PVC which is used for improved impact strength applications. This Type 2 material is available in a White or Light Gray color.
PVC Sheet Comes In Standard Sizing
Storage and transport of PVC is also an advantage. Its 48″ x 96″ size makes it a uniform size with plywood and other building products. The range of thickness is: .062″ – 3″ thick and thicker. There is no need for special storage or handling equipment. Common storage areas that can store drywall, plywood or other standard building materials can easily store these sheets. Forklifts and existing conveyor systems never need retrofits to handle the PVC.
Durability
Finished products using PVC sheets are long-lasting. The material is highly impact resistant, durable in extreme temperature swings, weather and corrosion resistant. Its use for storage of corrosive chemicals in extreme conditions make it an indispensable material for chemical coatings and other storage containers.
Adaptable
The ease of bonding and shaping are just one of the best features of industrial PVC sheeting. It also accepts painting and screen printing. Materials such as wood, other plastics, fabrics and paper can be bonded to the surface to enhance the aesthetic value of whatever is created. Coatings such as vinyl or acrylic lacquers can be used to turn the object into attractive household items. Scratches or etchings on the surface of the raw material are easily removed using fine sanding and buffing equipment. The versatility of PVC in standard sheets makes this product an excellent choice for virtually any type of machining and manufacturing application. For more information on the impact and corrosion resistance properties of these sheets, visit: Industrial Plastic Supply for PVC Sheet. Find out about all the qualities that make using these standardized sheets an attractive choice for industrial use.For information on this or any other plastic sheet, slab, rod or tube product – call us at: 866-832-9315 or click here to send us a request.
A wide variety of plastics are available in sheet form.
The term: ‘Plastic Sheet‘ or ‘Plastic Sheets’ is more of a general statement covering over a hundred types of plastic materials and plastic products. Some of the most popular plastic materials made as a sheet are:
In addition to the wide range of plastic materials available as plastic sheet, most of these materials are also available as: thin gauge or film, strip, plate, block, slab and plastic panels. The thin gauge or film materials are frequently available with or without a pressure sensitive adhesive also called ‘tape’. Sheet in some materials is available over 4.0″ thick and perhaps as thick as 8.0″ thick in a few materials. The standard sheet size on most of our plastic sheets is either 24″ X 48″ or the larger 48″ X 96″ sheet size; although some materials are available as: 48″ X 120″, 60″ X 96″ or 72″ X 96″. Contact us with with questions on your required piece sizes, we are happy to provide plastic sheets cut to size.
While there are lots and lots of different materials available as plastic sheet, there may only be one or two materials that are right for your application. We want to assist with your search. If you need help choosing the proper plastic material for your application, check out our free Plastic Material Selector Guide. Also, feel free to contact us for further assistance. As a leading plastic sheet distributor since 1975, we feel that we are your best choice as your new plastic sheet and sheets supplier. Give us a call at 866-832-9315.
There are hundreds of plastic manufacturers, and even more plastic sheet, rod and tube suppliers.
What makes one better or worse than another? Some of the biggest differences are in the quality of the materials they have in stock. Not all manufacturers are the same. Some produce very inexpensive materials for the disposable trade. A few supply high quality materials from the big names in the plastic industry.
We buy only from American companies. Our suppliers and warehouses are all here, in the USA. While several of our factories have parent companies in Western Europe, they manufacture the bulk of their materials here in the states. With the NAFTA requirements, we are able to provide certification to all our materials.
American Made Quality Makes A Difference
As you probably know, materials made in areas around the world don’t have the same quality control systems that we have here. We have seen materials from suppliers not in the USA or Western Europe, and have chosen to not carry any of these materials – they just don’t measure up to Made In The USA! We believe that that American Made still means something, and it transfers to the materials we supply.
Since 1975 we have partnered with the best manufacturers, with the best industrial, machinable, mechanical and professional grades of plastic materials available in the marketplace. Quality names like: Westlake Plastics, Ensinger Plastics, Gehr Plastics, Roechling Plastics, Polymer Industries, Spartech Plastics, Z/L Plastics, Plaskolite, and many, many more. None of these are suppliers are newcomers, most of our suppliers have been in business producing excellent quality plastic sheet and rod for over 50 years. We are the new guys, as we started in 1975!
Buy From An Establish Plastics Professional
Industrial Plastic Supply of Anaheim California
How can you tell if your plastics are ‘quality’ pieces of plastic? It is a bit tough to tell by just looking, and that is what the low quality suppliers and manufacturers count on. Sometimes the only way to tell is by cutting or machining a part. We have cut into materials that literally break when a saw blade comes into contact. Some materials have stress levels so high they bow significantly as we cut through the material. See article on Stress In Plastics.
These high internal stresses show up during machining as warping, changes in tolerance, large movement in part size and stress fractures. We have seen parts move by over 5% after part was machined and within 12 hours. This picture shows a piece of glass filled nylon from one of the ‘upstarts’ in the industry. As a test, we were cutting some strips. As you can see, the part has such a high stress level that it warped away from the rest of the sheet as we cut it. This is very dangerous for a person cutting or machining, as it can stop a blade or break free and strike an employee. We chose not to buy from this new company.
Plastic Sheet and rods Proudly American Made
We have been around the block a few times, and we know most of the things that will cause you problems in a material. That is why we only buy from the big guys, the high quality material manufacturers, the well known – tried and true manufacturers. We buy from the experts, the professionals, the leaders in our plastics industry. Supplying industrial grade plastics to machine shops may seem like an easy thing. We treat this process with the respect it deserves; your parts are important to you and your customers. We won’t let you down by providing unacceptable grades of plastic materials. Our parts aren’t stressed out!
Call on us today – 866-832-9315 and ask for a Plasticologist, or email us for more information about the quality materials we supply.
