CALL (866) 832-9315
Request a Quote
Not All Plastic Suppliers Are Created Equal

Not All Plastic Suppliers Are Created Equal

Big Differences Between Plastic Suppliers

While you can purchase a piece of plastic from many different suppliers, there are some significant differences between these suppliers. Some of the main differences are in the manufacturers and the materials that you get supplied. High quality Simona PVC rod machined to finished part

We see a wide range of materials and some drastically inferior grades of materials being sold to clients. Some materials have been produced too quickly or cooled too quickly causing a very high stressed plastic piece. These high stressed materials will warp, twist or crack when they get heated or during cutting. This material on the right is a piece of highly stressed Nylon. While cutting the material, our new customer had to stop the saw due to the severe warping and binding of the saw by this material. This new client brought this 24″ long part, and asked if we would cut it for him. We bought this part from him as an excellent example of a high stress plastic. (We did cut a quality piece of material to solve his problem).

One example of differences between manufacturers, is Gehr PVC rod is NSF 51 certified, while Simona PVC rod is not.

Other things you should consider when choosing a quality plastic supplier:

Quality of Materials

Origin of Materials

Huge in stock inventory of Performance Plastic Rod

Huge In Stock Inventory of Plastic Rod

Expert Support

In Stock Materials

Cutting – Converting Services

Longevity – How Long Have They Been In Business (We started in 1975)

Product Knowledge and Experience Equals Quality Plastic Suppliers

We believe that providing quality products is only part of our duty to you. You have intrusted us to help with your requirements, and we believe we should be good stewards of this trust, all part of being a quality plastic supplier. A plastic sheet supplier should advise you if the material you are looking for is the ‘wrong’ material. Acrylic does not do well at 450 degrees. Styrene does not make a good chemical tank. HDPE and PTFE do not bond. These and many more ‘land mines’ are things we help our clients with everyday. We have an experienced client support team (plastic experts), and we value the opportunity to assist our clients with this experience. Go ahead, ask us a question – that is why we have a “Ask A Plasticologist” page on our website.

If you need help, from what are the properties of Acetal, to temperature range on Ultem, please contact us. We look forward to assisting you and all our clients. Feel free to contact us with any questions, concerns or requests – call us at 866-832-9315 or e-mail us here.


Topic: Plastic Suppliers, Plastic Sheet Suppliers

Available Materials Plastic Strip and Strips For Food Processing and Material Handling

Available Materials Plastic Strip and Strips For Food Processing and Material Handling

Plastic Strip is common in other materials

A common standard item in the metals industry is ‘strip’. Strip is normally a piece of material that is 1/16″ – 3/8″ thick and 1.0″ – 4.0″ wide, although thicker and wider materials can also be referred to as strip. The metals industry produces various metals in these sizes of strip. In the plastics industry, strip is something we cut from larger sheets. The sizes are the same as listed above, but are cut from 48″ X 96″ or 48″ X 120″ sheets.

The a few of the most common plastics materials we cut to plastic strips are:

HDPE (High Density Polyethylene)

PTFE, TFE (Polytetrafluoroethylene)

UHMW – Ultra High Molecular Weight Polyethylene

Acetal Copolymer / Acetal HomopolymerPlastic Strip, plastic Strips and Plastic Tapes, Plastic Bar

Nylon – Polyamide

PVC – Polyvinylchloride

Polycarbonate – Covestro (Bayer) Makrolon

Most plastics can be cut to these strip sizes, with various lengths available depending on type of material. In some materials and in some sizes, depending on quantity, special run to size plastic strip is available. These special run plastic strips can be run to almost any length. Specifically, in the UHMW and PTFE materials, much longer lengths are available in rolls of material. The UHMW can be purchased in standard and adhesive back varieties. This UHMW with adhesive is a commonly used item in the wear strip applications because of its ease of installation. A large market for this kind of strip is in the food processing industry for all wear points and to reduce noise in the plant. Some of these same sizes with adhesive on the back are available in the PTFE, and are available in long tape style rolls. In some cases, colors other than natural are available, contact us for details.

Plastic Strip and Strips are available in special sizes

With the massive range of plastics available, and most of these materials available to be cut to strips, the nearly unlimited amount of choices in plastic strip availability make this post difficult to be all inclusive. Great material for the industrial, food processing, material handling, automotive and recreational industries.

Most plastics are available in large sheets, and we can cut these sheets to strip for you. Also, depending on the material, size and quantity, we can custom extrude your strip in longer lengths and to your requirements. Decide on a type of plastic, determine the size and quantity, and give us a call. Use your imagination, we can help.

If you have a project where strips would be ideal, please contact us to see if the type of material you need is available in the strip configuration that would be beneficial. Call us at: 866-832-9315 or drop us an email and we will be happy to go to work on your requirement.

Topic: Plastic Strip and Plastic Strips – Strip Plastics

Are HDPE sheet and Homopolymer Acetal Sheet The Same Materials?

Are HDPE sheet and Homopolymer Acetal Sheet The Same Materials?

Is HDPE Sheet and Acetal Homopolymer Sheet the same?

Here is another popular question asked by our clients. Is HDPE the same as Acetal Copolymer  / Delrin Acetal Homopolymer?
No, they are two totally different materials. Although the natural color of both is a milky white to opaque white, and they do look a bit similar, they are not. (HDPE is milky white to almost translucent depending on thickness, and the Acetal materials are a more opaque white to slightly milky – once again depending on thickness . See picture below of .500″ thick samples of HDPE and Acetal sheets)HDPE compared to Delrin Acetal Homopolymer sheet

HDPE and Acetal – Some Differences

The HDPE sheet and rod is a softer material, and is commonly known for its FDA certification and used in numerous food applications, such as: one gallon milk jugs, cutting boards, colored water glasses/cups, and many, many more. While it can be machined, because it is a bit softer and lighter, the tolerances it can be machined to are not very tight. It is not bondable, so it makes a great non-stick surface for sticky foods and adhesives.


The Acetal Copolymer and the premium Delrin® Acetal Homopolymer also have FDA certification, and are used heavily in the food processing industry. This material is a more mechanical material and is used in bearing and wear applications, cams, feeder screws, etc. This material is can be machined to tight tolerances, and will wear for long periods without lubrication. Due to its exceptional wear properties, it is not bondable, thus requiring mechanical fastening or threads to assemble. It has a very low water absorption, and you will find it in your toilet tank as the white moving parts in the filler mechanism. It is an extremely popular material for machinists, as it works much like soft brass.


While HDPE Sheet and Acetal Sheet look similar, they perform quite a bit differently.

While both materials are FDA approved, are machinable and can be used to make rigid wear resistant parts, they are two different resins and have drastically different physical properties. Another major difference is in the weight of these items, HDPE sheet and rod material weighs about 35% less than the Acetal sheet and rod material. Please check the data sheets for more information to assist in proper material selection. Acetal Data Sheet and HDPE Sheet Data

Acetal is commonly known as: Delrin Homopolymer Acetal, Tecaform AH,Ensital, Unital, Pomalux, Ultraform and many more.

HDPE is also known as: Ultraethylux, Densetec, Polystone G, Fortiflex, Versadur, Hostalen, and many more.

Contact us for more details on the HDPE and Acetal families of plastic materials, e-mail us or call 866-832-9315
Topic: HDPE sheet and Delrin Sheet (Acetal Sheet)

Plaskolite Tuffak and Westlake Polycarbonate Sheet, Sheets, Plate and Panels

Plaskolite Tuffak and Westlake Polycarbonate Sheet, Sheets, Plate and Panels

Things you should know about Polycarbonate Sheet, Sheets and Panels

A common misconception is that ‘all polycarbonate sheets are the same’. This is not true, as a matter of fact, it is far from a fact. While most manufacturers of polycarbonate sheets start with a similar base resin, this is where the similarities normally stop. Most polycarbonate sheet extruders run a base material far different from what the standard has been for the last 30 years. Most polycarbonate sheet is now made without the flame rating it had in the past. Polycarbonate Sheets are sometimes called ‘polycarbonate panels’ or ‘polycarbonate plates’, they are still made from the same high quality resins. One of the best known manufacturers of Polycarbonate resins and sheets is Sabic Polymers®, the manufacturers of Lexan® resin and Lexan® Sheet products. Over the last several years, Sabic has quietly discontinued the UL ratings on their Polycarbonate.

Industrial Plastic Supply And Tuffak GP (formerly Makrolon GP)Bayer MaterialScience, sold to Covestro and now purchased by Plaskolite

For more than 30 years, Industrial Plastic Supply has relied on the high quality Polycarbonate Sheets produced by Sheffield, now part of Plaskolite (formerly Covestro and Bayer MaterialScience). Plaskolite produces a crystal clear, ultra high impact strength polycarbonate resin, this Makrolon resin is the finest in the industry. Plaskolite has also chosen to continue to produce this high quality material in general purpose, and the Tuffak GP meets the UL 94 V-0 rating, the only supplier to continue this expensive, but extremely valuable service. Take a moment and look at your requirements, see if perhaps somewhere on the blue print is a note that states your polycarbonate material needs to be UL 94 V-0 approved or rated. If so, Tuffak GP is your only and best choice!

How is Plaskolite Tuffak GP Polycarbonate available

We stock Plaskolite (formerly Covestro – Bayer MaterialScience) Tuffak GP in flat panels, considered Polycarbonate Sheet or as Polycarbonate Sheets. We can cut theses sheet Polycarbonate materials to strip or strips, blocks, or just a cut to size piece. At Industrial Plastic Supply we have stocked large quantities of these materials, and continue to keep Tuffak GP (formerly Makrolon GP) and Tuffak FI (formerly Makrolon FI) sheets in stock. With a wide range of thicknesses ( .030″ – .500″ thick) and sheet sizes of 48″ X 96″, 60″ X 60″ and 72″ X 96″ as standard in .118″ – .500″, we can fill all your requirements.

Why you should use Plaskolite Tuffak Polycarbonate Sheet

Superior clarity, quality, surface finish, flame retardant and full USA factory technical assistance are just a few reasons. Buying polycarbonate sheets imported from somewhere half way around the globe, from anTransparent Polycarbonate Sheet and Plate unknown manufacturer with little or no technical support can be very risky. Plaskolite (formerly Covestro/Sheffield) manufacturers this premium quality polycarbonate sheet right here in the good old USA, in Sheffield, Massachusetts. They produce this crystal clear sheet on the latest and most technologically advanced extruders available, and have several warehouses for us to get material quickly for you. Why settle for an unknown? Can you afford to ‘try’ the other guys? Step up to the finest quality, and yet still competitively priced polycarbonate sheet, get Plaskolite Tuffak GP Polycarbonate Sheet(formerly Covestro Makrolon GP)  for your next project. Industrial Plastic Supply also carries the Westlake Zelux M Polycarbonate Sheet and Zelux W Polycarbonate Plate. The Zelux M is a machine grade Polycarbonate Plate from .375″ – 4″ thick sheet, and the Zelux W is a clear – Window Grade thick Polycarbonate Plate in the same thickness range. Contact us for more information on this thicker material. We also supply other manufacturers grades of Polycarbonate Plate, including, but not limited to: Ensinger Plastics, Polymer Industries (formerly Nytef Plastics), Roechling Plastics and more. Contact us for more information or technical assistance on Polycarbonate or any other quality plastic sheet, rod or tube. Call us at 866-832-9315 or send us a quick note here.

Topic: Polycarbonate Sheet and Rod Materials



Polypropylene Sheet, Sheets and Plate for Industrial Applications

Polypropylene Sheet, Sheets and Plate for Industrial Applications

Polypropylene Sheet in Industrial Applications

Known by a few different industry trade names including: Densitec®, Hostalen®, Marlex®, Protec®. Polypropylene is a very versatile and tough material that has many applications in both industrial and in manufacturing applications. Some of the major factories that produce Polypropylene sheet are: Vycom Plastics, Simona America and Polymer Industries. If you need the FM-4910 grade, Laminations and Vycom are the main suppliers. We represent all of these companies.

Some examples of Polypropylene usage are: containers to store food products, industrial chemical tanks, medical trays, and fibers that are used to

Large 14" diameter Natural Polypropylene Rod

14 inch Natural Polypropylene Rod produced by Gehr Plastics, the largest domestic plastic rod currently in production. 12″ diameter UHMW rod from Rochling Plastics, Industrial Plastic Supply is master distributor for both of these manufacturers.

make indoor and outdoor carpeting. A material that has the attributes of tensile strength, a resistance to high temperatures and is highly resistant to corrosion, Polypropylene is a unique material that can be used in the manufacture of chemical tanks that are used for the mixing of liquid materials that may have slight corrosive properties as part of their compounds. Polypropylene is available in a wide range of sizes and shapes. We supply it in sheets that can be cut to size for whatever your application needs happen to be, and it is also available in white and black, which are also available in several different thicknesses. Polypropylene is also available as a rod, which is available in a large range of diameters from .250″ and up. For a company that manufactures caustic compounds for resale to other B2B businesses, Polypropylene is the product that will meet your requirements as one of the most chemical resistant materials. It is a material that is resistant to temperatures of up to 180°F, and it is able to handle acids and caustic material as well as alkaline based materials.

Fabrication of Polypropylene Sheet – Welding

Polypropylene sheet is often fabricated, often through welding, to produce chemical resistant tanks. The material is ‘welded’ through the use of very hot air, in a pin point application and the use of welding rod of the same material. This process produces a water tight seam, and is excellent for producing tanks. Polypropylene’s chemical resistance also means it can not be bonded or glued – thus the need for welding. If you are looking for a material that has this type of tensile strength, it may be surprising to know that the garbage bags that we often use to dispose of our uneaten meals are made of Polypropylene (or HDPE). Another thing about this material is that it actually floats in water. The incredible toughness of Polypropylene material makes it a great choice in the manufacture of items like rope. Other plastics to consider for high chemical resistance are: PTFE, HDPE, UHMW and PVC; the choice of material depends on application and chemicals involved. Another use of Polypropylene is in the medical field. This material has been used for orthotics, prosthetic limbs, and other medical devices. One use is during hernia procedures, where a simple patch of the material is placed over the actual area of the hernia. The material is rarely rejected by the body’s immune system. Polypropylene is also very recyclable. It is number 5 on the list of common plastics.

Polypropylene is a common material for use in many household products, and is a popular material for injection molded parts because of its strength and stiffness. If your next job requires a rigid material that is FDA approved for certain applications, exhibits superior strength against corrosive materials, then Polypropylene Sheet and Rod may be an excellent choice. It is versatile enough to be used in the medical field and even has been used in the radio control airplane field, where it’s gaining popularity as a material to form the bodies of these aircraft. When used in this application, a model airplane can absorb more of the kinetic energy that is caused by a crash, and the plane survives the impact much better than when traditional polystyrene foam has been used. Polypropylene is a material that is versatile enough to meet just about any requirement that your particular project has to meet, and is available in sheets that are natural (translucent straw), white or black in color. It can be easily cut to meet your particular specifications, and is available in a wide range of thicknesses. Let us help you with your Polypropylene needs to complete on time and on spec. Call us today at 866-832-9315 or click here to send us your request or questions. Google+